FTTH Waterproof Distribution Fiber Optic Splitter Box NAP 8 Cores
with LGX Module
GJS-2022 Fiber Optic Splice / Splitter Closure
This splice closure integrates distribution and splitting in one,
can realize the direct fusion and branching of the optical cable,
and is suitable for the wiring connection in the optical
communication equipment. Through the adapter and jumper to bring in
the signal to realize optical distribution function, it is also
suitable for fiber optic cables and pigtail protective connection;
the unique three-tier design of the box body can be used as a fiber
splitter or splice box; the flip board can be flipped≥180°,it is
more convenient to install the box or maintenance. If remove the
board, it can bed as a splice closure to meet different choices.
Splice closure (2 layer) Splitter closure (3 layer)
Features
- The product is made of high-quality impact resistant plastic and
has a standard user interface that can be re-opened.
- Can accommodate two 1x8 PLC splitter LGX module or steel tube type;
- Anti-ultraviolet,anti- impact and waterproof function;
- Unique flip board, flip angle ≥ 180 °, fusion area and distribution
area is more obvious, reducing the cable crossing;
- Fiber optic cable can go in and out of the box without cut the
cable.
Technical parameters
- Optical fiber radius of curvature: ≥40mm
- Splice tray additional loss: ≤0.1dB
- Temperature range: -40°C ~ +60°C
- Anti side pressure: ≥2000N/10cm
- Impact resistance: ≥20N.m
- Protection class: IP65
Specification
| Model | GJS-2022-S | GJS-2022-F |
| Dimension (mm) | 290*190*110 | 290*190*90 |
| Cable diameter (mm) | Φ7-φ18 | Φ7-φ18 |
| Cable port | 4pcs round ports, 16pcs 2*3mm drop cable ports | 2in 2 out |
| Max. Split ratio | 2pcs 1x8 mini splitter | / |
| Max. Splice tray | 1pc | 3pcs |
| Max. Fusion splice | 24 cores | 72 cores |
Product details:
Total box with 3 layers:
the upper layer for splitting, can max. hold 2pcs 1x8 or 1pc 1x16
splitter module
the middle layer is the splice tray for fusion, max. 24cores with
1tray,white color
the bottom is for ditribution of feeder cable from outside, and
cable storage and routing.
the whole box is closed with 2 buckles an rubber seal with IP65
grade
The splice tray is fix on the box with screws with stainless teel
metal sheet, it is good protection from damage during long
transportation and violent handworks. to keep fiber stable and high
performance.
the cable port is on the bottom of the box, there are 2round ports
at each side of the box, there is one another more for future use,
the diameter can be 7-18mm;
on one side of the box, above the cable ports, there are 16pcs
2*3mm drop cable outputs, it is on the first layer plate with
rubber seal, good waterproof, and with cable q6pcs fix slots.
Packing list
| Main body | 1 set |
| L=400mm bare fiber buffer tube | 2 pcs |
| Hoop / clamp | 2 pcs |
| 3x100 nylon tie | 26 pcs |
| Heat shrinkable tube L=60mm | 2-72 pcs (configuration on demand) |
| User manual | 1pc |
