Steel Walk Board Roll Forming Production Machine Line made in China
Size:
HR sheet 2mm thick to produce the planks
The sizes for the same are:
225mm wide
38mm thick after bending
Length 1mtr to 4mtr long
Thickness HR Sheets 2mm thick
Production Process
Passived-Decoiler --- Leveler --- servo Feeding machine ---
Punching machine --- Forming machine --- Hydraulic cutting ---
Collection table
Machine
| No. | Name | Quanti. | |
| 1 | Passived de-coiler | 1 | |
| 2 | Leveler | 1 | |
| 3 | Servo feeder | 1 | |
| 4 | Punching press JF21-125 | 1 | YANGLI GROUP |
| 5 | Walk Board Punching Die | 1 | |
| 6 | Forming Machine | 1 | |
| 7 | Cutting Device | 1 | |
| 8 | Cutting Blades | 1 | |
| 9 | Collection Table | 1 | |
| 10 | Electric control system | 1 | |
Forming machine
Rack: cast iron frame,
Forming stations: 18stations
Material of bearing 40Cr, quenching treatment
Material:GCr15, Quenching, Hardness:HRC58-62º
Motor power: 30KW Frequency conversion motor ZQ500 reducer
Drive type: every rack has one gear power distribution box.
Electronic controlling: PLC
Full line is controlled by PLC control system with touch screen
operation to achieve the human and PLC interactive. The operator
can monitor the setting program (programmable control) and modify
the parameter to control the line. Also can check the running
status, parameter and error indication etc...
Operation type: manual /auto two type switch. In manual position:
can run the each part of the machine. In auto position: can run the
full line. The emergency stop ensures the safe of the equipment and
operator.
Machine side is equipped with the manual operation control panel
for convenient worker to operate;
