Multi Stage Pin Eye Single Acting Telescopic Hydraulic Ram for Dump
Truck Trailer
Sizes/Measurements are in inches rounded to nearest fraction - All
cylinders are Single Acting
Introduction:
Retractable hydraulic cylinder can get a longer working stroke with
multistage sleeve-shaped piston rod hydraulic cylinder, telescopic
hydraulic cylinder, also known as multistage hydraulic cylinder.
Telescopic hydraulic cylinder is composed of two or more piston
hydraulic cylinder set.
The piston rod of the previous stage piston cylinder is the
cylinder of the latter piston cylinde.
In general telescopic cylinders are much more expensive than normal
cylinders.
Most telescopic cylinders are single acting (push).
25,000# AXLE 16X7.5 BRAKES, AUTO SLACKS
Standard JIC Fitting on All Hydraulic and Air Lines
No Hydraulics in Rear of Trailer, Reduces chance of leaks and
centralizes plumbing
(2) Fixed Stops at Front of Trailer
3 1/2" Rollers Welded to Outside Frame, 2-ply Rubber Fenders on
Rear
(4) NYLON TIE DOWN STRAPS & ALL L.E.D LIGHTS MEET DOT #108
New 10 Hole Uni-MountSteel Rims w/ 11R22.5 Tires (8)
ICC REGULATED BUMPER- AIR ACTUATED
| Specification |
| Capacity | OFF TRAILER WITH 60,000# LIFT CAPACITY |
| OUTSIDE RAIL CONTAINERS | HANDLE 20'-25’ |
| PSI(Pressure) | Adjustable PSI (2,500) |
| Valve | Commercial Valve |
12”X 4”X 3/8”GRADE A 500 RECTANGULAR TUBING MAIN FRAME ½” X 4” FLAT BAR WEAR PAD, ½” X 4” TRUSS WRAP, ¾” KING PIN PLATE, 12”X 4” CROSS MEMBERS, 4”X4”X 3/8” STABILIZER FRAME 3- ½ 7” BORE REEVE CYLINDER (2) 8”-4 STAGE TELESCOPIC MAIN LIFT CYLINDER (2)
|
Piston Seals:
A. Low friction, high load piston seals with outboard wear bands are
standard. Loaded lip seals and cast iron rings are optional.
B. The seal is the use of rubber or plastic seal of the elastic ring
so that a variety of cross-section ring in the static and dynamic
fit between the surface to prevent leakage.
C. Common seal are O-shaped, Y-shaped, V-shaped and so on.
D. It has the advantages of simple structure, easy manufacture,
automatic compensation after wear, reliable performance, and can be
used between the cylinder and the piston, between the cylinder head
and the piston rod, between the piston and the piston rod, between
the cylinder tube and the cylinder head.
Quality control:
1. Seiko secret agents, to ensure quality of the piston rod.
2. The product have to go through heat treatment - bore boring -
grinding - car processing - black nitriding and many other
processes.
3. The company accepted the Valet processing various types and
various sizes products, processing and processing more quotes,
welcome to consult.
After-sales service:
1. We offer 12 months warranty.
2. Guarantee period is subjected to warranty instruction (1 year/
2000 hours whichever comes first).
3. Free after-sale service during the warranty refers to problems
caused by quality issues; any non quality problem occurred, we will
charge the maintenance fee according to relevant standard.
4. Service Center all over the world for after sales problems.
5. Various operation instructions such as: products inspect and
control ,Receiving inspection control ,sampling inspection
operation instruction, process quality inspection operation
instruction etc
6. Pre-sale service and free consultation service.
7. Quality control service includes pre-acceptance, departure
inspection, arrival inspection, PDI delivery inspection.
