Description of insulation anchor pins/ insulation hangers
Perforated base insulation anchors pins , also named insulation
hangers, insulation pins,
insulation spindle and insulation support. it is made of square perforated base and metal
spindles/nails.
perforated base insulation anchor pins,There are two installation
methods, one fix with
adhesive, and the other is to use drive nails or cement nails.
Specification of perforated base insulation anchor pins
1.material Grade: SUS201,SUS304,SUS316, galvanized steel,aluminum
for the perforated
base washer aluminum grade 1100 , anneal mild steel or anneal stainless steel
wire for the
pins of anchors
2.production Standard: DIN 315
3.Single insulation nail bearing capacity> 0.8KN
Thermal conductivity >0.004
Product Name | Insulation anchor Pins, insulation hangers |
plate size | 30mm,40mm,50mm |
plate thickness | 0.4mm-0.5mm |
pin length | 15mm-180mm |
pin diameter | 2.0mm-3mm |
washer diameter | 25mm-50mm |
washer thickness | 0.3mm-0.6mm |
Insulation anchor Pins Usage:
Exclusively used for fixing adiabatic materials in ducts of
air-conditioner, for glass-wool and
rock-wool in soundproofing works,and for the duct-lining. ss insulation pins also used in car
,
Subway and high-speed train.
Insulation anchor Pins is with high penetration strength with all types of thermal
insulation boards,
suitable for brick and conrete walls.
The average of 1-10 layers is 6 per square meter, the average of
11-20 layers is 7 per square meter,
and the 21-26 layers are 9 per square meter. Any single-plate wrench with an area
greater than 0.1
square meter must be anchored, depending on the shape and site conditions. At the corners of the
sun, under the mouth, around the edge of the hole, the density of
the anchor should be increased,
the distance is not more than 300 mm, not less than 60 mm from the
edge of the base.
Insulation anchor Pins cover: Protect people hand from being injured when putting insulation.
Images of insulation anchor pins
Advantages of Huihao company
1.Accept small orders of more than 5000.
2.Free samples are available, and for special specifications, the
customer is required to pay the
mold fee. 3.Provide installation instructions.
4.Standard export packaging, easy to load and unload at the same
time sturdy and clean.
5.Provide customer customs clearance documents and certificate of
origin,CO, FORM E, FORM A
and others.
6.Quality Assurance, ISO9001-2008, CE, SAS, BV, Material
Certification, Product Inspection
Report, Performance Parameters.
7.Duration guarantee, 80 excellent CNC equipment
