2-1/2” Stainless Steel Lacing Anchors For Fastening Lagging To
Exhaust Systems
2-1/2” Stainless steel lacing anchors are primarily used as the
means of fastening lagging to exhaust systems (tie wire as the lacing material).
Lacing anchors can be used to add additional support to existing
lagging, or used with other raw insulation material. Lacing anchors are
manufactured in nail point configuration, and are 12G in diameter.
To secure to lagging it is recommended that 12G self-locking washers- oblong
or round- be used.
>>>Specification Of The Metal Lacing Anchors
| D | C | L |
| 14 ga (.080) | 7/8" | 2-1/2" |
| 14 ga (.080) | 7/8" | 4-1/2" |
| 12 ga (.106) | 7/8" | 2-1/2" |
| 12 ga (.106) | 7/8" | 4-1/2" |
- Wide choice of fasteners for removable insulation blanket
- Provide strong, durable fixings even in elevated temperature
applications
- Available in galvanized steel and stainless steel
- Available diameters : 2 mm (14 ga) and 2,7 mm (12 ga)
- Pins length : 63 mm (2 1/2") and 114 mm (4 1/2")
>>>Detailed Image Of The Stainless Steel Lacing Anchors
| US standard lacing anchor | EU standard lacing anchor | AU standard lacing anchor |
 |  |  |
The head diameter is 1 inch, the pin diameter is 10Ga, the length we have 1/2inch, 3/4 inch, 7/8 inch, 1 inch, 1-1/8inch,
1-1/2 inch 2 inch | The head diameter is 30mm, the pin diameter is 2.7mm, there are many different length for EU market, the length we manufactured-22mm, 27mm, 28mm, 32mm 42mm, 48mm 58mm
60mm 100mm
Some customer will need kraft paper under head | The mostly of length in Australia is 25mm, 50mm, 75mm, 100mm.
Lacing anchors marked NO AB to notify the blanket is asbestos free
Available diameters : 2 mm (14 ga) and 2,7 mm (12 ga)
Pins length : 63 mm (2 1/2") and 114 mm (4 1/2") |
>>>Application Of The Lacing Anchors
>>> Related Products
Self-locking washers and dome caps can be used to cover the top of
the metal lacing anchors.
Round Self Locking Washers
Material: stainless steel or galvanized steel or aluminum
Size: 1" or 1-3/16" or 1-1/2" or 2"
Thickness: 28ga (0.4mm)
Self-locking washers are designed to be used with weld pins,
insulation-hangers, lacing anchors, etc.
| Diameter: | 1" | 1-3/16″ | 1-1/2” |
| Thickness: | 0.015" | 0.015" | 0.015" |
| Plating: | Galvanized | Galvanized | Galvanized |
| Material: | Mild Steel /SS 304 | Mild Steel /SS 304 | Mild Steel /SS 304 |
| Edge: | Beveled or Flat | Beveled or Flat | Beveled or Fla |
Square Self-Locking Washers
Material: stainless steel or galvanized steel or aluminum
Thickness: 28ga (0.4mm)
Self-locking washers are designed to be used with weld pins,
insulation-hangers, lacing anchors, etc.
| Pin Diameter | 2-1/2" | 1-1/2" | 1-1/4" | 1-1/2" |
| 14 Ga (2mm) | square | square | square | round |
| 12 Ga | square | square | square | round |
| 10 Ga | square | square | square | round |
| 3mm | square | square | square | round |
Dome Cap Washers
Dome washers are designed to be used where appearance and safety
are factors when installing insulation, or fabricating
blankets or pads. The washers are used to cover the nail point on
weld pins, hangers, lacing anchors
& quilt pins.
Material | galvanized, aluminum and stainless steel |
Finish: | brushed aluminum, white plastic coating, black plastic coating etc |
A: | 20mm,22mm,25mm,30mm,38mm |
B: | 10 Ga Or 12 Ga Or 14 Ga |
C: | 9/32" (7.2mm) |
Packing of the Lacing anchors:
Cartons+pallets in common, also could be packing accoring to the
customer's requirements.
