Operable Doors Folding Room Divider Hotel Sliding Partition Walls
Description:
The operable wall series is the highest specification range of
fully operable, individual-panel movable partitions system.
Acoustic insulation of up to 56dB noise reduction is achieved with
a combination of operable top and bottom seals, high performance
multiple in fill's and a panel assembly design that allows an
acoustic break between the frame and outer layer.
The vertical channels of each panel incorporate polymer inserts
that facilitate an acoustic seal when the panels are set out as a
wall. Panels are produced in three thickness, 65 mm, 85 mm and 100
mm, depending on acoustic rating (from 37dB–56dB).
Technical information:
| Series | BG65 | BG85 | BG100 |
| Panel suspension | Top hung only | Top hung only | Top hung only |
| Panel thickness | 65 mm | 85 mm | 100 mm |
| Max height | 4000 mm | 6000 mm | 18000 mm |
| Panel width | 500-1200 mm | 500-1200 mm | 500-1200 mm |
| Face material | 9 mm | 9 mm | 12 mm |
| Pass doors | Single door or Double door |
| Sound insulation | 20-32dB Rw | 28-36dB Rw | 32-50dB Rw |
Finish Material | Plywood, MDF, Laminate, Melamine, Gypsum board, Fabric, Leather,
Insulation board, Fireproof board, Wall paper, Vinyl, Painting,
etc. (Customized) |
Advantage:
1.It can be moved and reused repeatedly. The compartment system
material will not bring waste to the environment. It is a kind of
green building materials and has a long service life. In the long
run, installing lalat high compartment system material is better
than installing other forms. Partition materials are cheaper and
more cost-effective.
2.During use, the positions of the doors, windows, physical
modules, and glass partitions can be exchanged at any time, and can
be reassembled and reused. After the materials are disassembled and
assembled, the damage is minimal, and the expenses incurred by the
frequent relocation of offices can be greatly reduced.
3.The internal structure can be easily cable laying. Without
wall-embedding, the maintenance and replacement of cables is more
convenient, and separation of strong and weak electricity is
possible. The cable trough can act as a shield for signal lines.
4.Fast installation.
5.Fireproof and fireproof. The compartment system is composed of
metal structures. The materials such as glass and color steel plate
also have fire resistance. The fire resistance of the compartment
system materials can reach 30, 60 or 90 minutes.
6.No pollution odor emissions, can be used immediately after
installation.
7.The door frame has a sealing strip, the door leaf is a
trapezoidal edge, the door frame is a trapezoidal mouth, and the
sound insulation effect and the sealing performance are improved.
8.The glass door lock can be installed in the middle, it is
extremely easy to use.
9.Blinds can be installed inside, not easy to dirty, no cleaning.
10.The sound insulation effect is good, and the partition wall has
a very good sound insulation effect.
11.Material selection, you can choose double glass plus blinds, you
can also choose color steel plate, gypsum board, melamine board,
fire board, cloth velvet and so on.
12.Colors for you to choose from, each material has a variety of
colors, different color components can be used with. You can even
specify or provide any color and texture finish material.
13.Construction voice is small. Does not affect the working life of
people around them.
14.The effect of fashion, elegance, simplicity and refinement.
Accessories details:
Track: The tracks are made from extruded 6063 - T5 anodized aluminium.
The track housing shall utilize grooves and interlocking steel pins
for positive alignment of adjacent track sections, and shall be
reinforced overhead by drop rod brackets. Aluminum track housing
shall include an integral nut slot to accept a hardened square nut
for attaching each drop rod bracket to the top of the track.
Panels:The Panels will be made from 12mm MDF boards and shall be 100mm
thick and 1230mm maximum width, made to the appropriate acoustic
rating and structural backing and mounted in full perimeter
extruded aluminium frames with interlocking corner construction
.The panel faces shall be finished with selected material.
Panel Surface Finish:The panel surface will be as per the clients requirement finished
either in Sliwal factory – China or by others . The normal finish
such as:laminate,veneer,melamine,fabric etc.
Seals: vinyl seal of butane rubber will be used as top and bottom and as
well as closure seals for the operable wall system.Retractable seal
drop will be 23mm.
