2018-2-22
Custom Black Epoxy Resin IslandTop Used For Education, Medical
Institutions
Resistance to high temperature
And laboratory common high temperature 600 degrees, not foaming,
not broken, especially suitable for a long time to place the
combustion furnace ventilation cabinet.
Absolute moisture
The epoxy resin worktop with low water absorbition, does not absorb
moisture in the air, the installation will not warp deformation,
especially suitable for the operation of splash zone.
1. Product Description:
Size: Customizable
Color: Black
Thickness: 16,19,25 mm
Surface: Matt/Polishing
Mini order : 50 Square meters
Delivery time: 15-30 days after receipt of deposit.
2. Common specification sheet (Unit : mm)
| Long | Wide | Thickness |
| 1200 | 700(750) | 16/19/25 |
| 1500 | 700(750) | 16/19/25 |
| 1800 | 700(750) | 16/19/25 |
| 2400 | 700(750) | 16/19/25 |
| 3000 | 700(750) | 16/19/25
|
3. Epoxy Resin Worktops
Epoxy resin lab Worktops are the most widely used laboratory worksurface. Worktops are fabricated to custom dimensions, including machined fixture
cutouts.
4. Chemical Resistance
Epoxy Resin is highly resistant to the normally used laboratory
alkalies, alcohol, acids and solvents. The following solutions
listed were tested for a period of 24 hours with optimum
resistance.
5. Minimum acceptable results
Minimum acceptable test results shall be equal to or better than
the following reagent rating:
| Alkaline Solutions-Corrosive | |
| Ammonium Hydroxide 10% | 1 |
| Sodium Carbonate Sol 20% | 1 |
| Sodium Hydroxide 60% | 1 |
| Sodium Hypochlorite Sol 4% | 1 |
| Potassium Hydroxide 15% | 1 |
| Organic Solvents | |
| Acetone | 2 |
| Benzen | 2 |
| Carbon Tetrachloride | 2 |
| Dimethyl Ether | 1 |
| Dimethyl Formamide | 1 |
| Ethyl Acetate | 1 |
| Ethyl Alcohol 95% | 1 |
| Heptane | 1 |
| Isooctane | 1 |
| Kerosene | 1 |
| Ethylene Dichloride | 1 |
| Methyl Alcohol | 1 |
| Toluene | 1 |
