PDU socket cabinet special SPD surge band lamp lightning protection
eight position hole aluminum alloy row.
Product Details
PDU lightning protection socket is a kind of lightning and surge
pulse which can quickly absorb the power supply system. [1] ensures
the safe use of electrical appliance in bad environment and multi
mine area. It is specially used to protect the sensitive equipment
of single-phase AC power supply. It is applied to the equipment end
as the third level protection of the power supply.
Product features
1. with temperature and overcurrent failure protection circuit, it
does not affect the normal operation of the circuit.
2. lightning protection socket has low residual pressure and large
flow capacity
3. power indicator to monitor the power supply of the converter
Product specification
1.Rated Operating Voitage(UC): 250V～
2.Voltage protective level(UP):1.0KV
3. Max discharge current(IMAX):6KA
4. Nominal discharge current(IN):3KA
5. Protection mode: L-N
6. technical parameter: MAX2.5KW-MAX10A
Working principle of product
The surge protector of PDU lightning protection socket is very high
when no voltage is needed, which is equivalent to breaking circuit.
When the voltage occurs, the impedance drops to a few Europe, and
the surge current will flow through the surge protector and will
not enter the device. At the same time, because the surge protector
has a small impedance at this time, the voltage on both sides of
the surge is relatively small, and because he is in parallel with
the protected equipment, it prevents the equipment from suffering
from large surge power. Pressure, so as to play the effect of
discharge and pressure limiting.
Use of attention
1. lightning protection socket frame type lightning protection
socket press the power switch button, the grounding indicator light
(yellow), indicating that the ground is reliable; the working light
is bright (green), indicating the normal work of the lightning
protection module; the power indicator light is bright (red),
indicating the normal connection of the power supply.
2. The grounding terminal of the lightning protection socket is
connected with the E terminal of the plug earth wire.
3. The grounding screw with 2.5m square meters above ground wire is
connected to the power supply socket type surge protector on
Product packaging:Carton packing
Transportation method
1. Express company: FEDEX,UPS,DHL,TNT
2. Trains, ships, aircraft transport
