DB9 Computer Data Line Surge Protection , Network Serial Port Surge Protector

DB9 computer data signal lightning protector, network serial port signal arrester, photoelectric isolator

Brief introduction

DB serial port signal protector is designed according to IEC and GB standard. It is divided into D (serial port) interface 9 pin and 25 pin two series. It provides a surge protection between lines and lines for RS232, RS485/422, wired remote sensing, telemetry, remote control and other D interface devices such as 9 and 25 pins. It is easy to install, without maintenance and reaction speed skin. Second level, we can fully protect the devices that use the latest semiconductor devices.

Working principle of product

The product is built with a fast transient voltage suppression protector designed to protect the RS interface and use a TVS transient voltage suppressor. Under normal circumstances, the TVS tube is in a high voltage resistance state. When the ends of the TVS tube are subjected to instantaneous high energy shock, it can reduce the impedance of the two end at a high speed and absorb a large current at a higher speed. The voltage at both ends is clamped to a predetermined value, so that the circuit elements behind it will not be damaged by transient high voltage impact.

Product features

1. bi-directional DB interface

2. is suitable for various interfaces

3. insertion loss is small

4. the coefficient of standing wave is small and the range of working frequency is wide

Product specification

Use of attention

1. installing the grounding wire is to disconnect the device, and avoid damage to the equipment due to the introduction of strong current such as electric welding from the ground wire end.

2. connect the grounding wire of the surge protector with the metal case to the grounding collection line.

3. when the surge protector is in use, it should be checked regularly. If there is any fault, it should be repaired or replaced in time, so as to ensure the safety of the protected equipment.

4. non professional personnel do not disassemble.

Company profile

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.
All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.

Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.

Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.

All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.

Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.

Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.