lightning protector, lightning rod, high voltage grounding pin,
lightning protection, household lightning rod.
Product description
Lightning rod is a lightning protection measure independently
developed by Torre Electric Co., Ltd. for lightning hazards. The
lightning rod has no radioactive elements, and has strong corrosion
resistance and strong wind resistance. Passive and non energy
consuming components will not be impacted by surge impact and long
life. The strong lightning current after lightning flashes into the
earth quickly and effectively, and protects the protected antenna
tower or building from striking and charging. The attenuation and
limitation of the current intensity of the mine can make the
protected equipment reduce the harm of counterattack and induced
overvoltage.
Product features
1. work more accurately, reduce the probability of lightning
arrester point falls in non body
2. free maintenance: passive, no power supply, no energy consuming
components.
3. light weight, low load requirement
4. lead the lead accurately to the ground
Use of attention
1. a straight line should be formed when the lightning rod is
connected with the mast.
2. lightning arresters shall not be installed on the frame and roof
of the 35kV high voltage distribution device and the roof. The
lightning rod mounted on the frame should be connected to the
grounding network and equipped with a centralized grounding device.
3. the distance between the lightning rod and earthing device from
the road and exit should be greater than 3m. Otherwise, the gravel
or asphalt surface should be 5 to 8cm thick, so that the protection
of the insured is not affected by step voltage.
4. the distance between the lightning rod and earthing device from
the road and exit should be greater than 3m. Otherwise, the gravel
or asphalt surface should be 5 to 8cm thick, so that the protection
of the insured is not affected by step voltage.
Product specification
| Model | Specifications | With flange height M | Texture of material | working temperature |
TRSB
| 3.1 | 1.2
1.5
1.8
The highest 20m can be done |
Stainless steel
|
-40℃ ～ +80℃
|
| 3.3 |
| 4.3 |
| 5.3 |
| 6.3 |
Working principle of product
When the thunder discharge close to the ground when it makes the
ground electric field distortion. At the top of the lightning rod,
the space of the local electric field is formed to influence the
direction of the development of the lightning pilot discharge,
guiding the lightning to discharge to the lightning rod, and
introducing the lightning current through the grounding wire and
grounding device to the earth, so that the protected object will
not be struck by lightning.
Company profile
Thor has been designing new products to meet the RoHS directive
since 2006. Thor’s ongoing commitment to RoHS compliance includes
continuing efforts to reduce the presence of hazardous substances
in the design and manufacture of a growing number of popular
products.
we committed to meeting the requirements of the European Union’s
Waste Electrical and Electronic Equipment (WEEE) directive. This
directive requires producers of electrical and electronic equipment
to finance the take-back for re-use or recycling of their products
placed on the EU market after 2005.
