Power surge protector can appliance or device designed to protect
electrical devices from voltage spikes
Brief introduction
Surge protector is an electronic device that provides security
protection for all kinds of electronic devices, instruments and
communication lines. When the peak current or voltage is suddenly
produced in the electrical circuit or communication line because of
the external interference, the surge protector can guide the shunt
in very short time, thus avoiding the damage of the surge to other
equipment in the circuit.
Product specification
| Model | | TRS9-B80 | TRS9-B100 | TRS9-B120 | TRS9-150 |
| Rated Operating Voitage | UC | 275 | 275 | 275 | 275 |
| Voltage protective level | Up(KV)≤ | 1.7 | 2.1 | 2.35 | 2.8 |
| Max discharge current | Imax(8/20μS) | 80 | 100 | 120 | 150 |
Nominal discharge current
| In(8/20μS) | 40 | 60 | 80 | 100 |
| Ressponse time | NS | <25 |
| Lndication of invalidation | Aging invalidation:green Normal,red:Invaldation |
| Operating condition | Temp:-40℃~+70℃ |
| RH≤95%(25℃) |
| Sea level elevation≤3km |
Remote signal function
| Can also picking |
| Remarks | Other max continuous operating voltage can be customized |
Product features
1. multi-functional overvoltage protection, lightning and
overpressure are no longer afraid of disasters.
2. using the latest arc extinguishing technology to avoid fire
completely
3. leakage current is small, the response time is fast, and the
residual pressure is low
4. copper fittings have good electrical conductivity
Notice of product
1. surge protector is installed with 35MM standard guide rail
2. generally speaking, it is better to separate the protected
conductor from the non protected conductor, and it should be
separated from the ground wire. At the same time, in order to avoid
transient orthogonal coupling between power cables and
communication cables, necessary measurements should be made.
3. identify the input / output interface identifier of the
lightning protector, input the external line and output the
connection device.
4. it should match the working voltage of the protected equipment.
Please install according to the installation sketch.
Working principle of product
The lightning arrester can effectively protect the power equipment.
Once the abnormal voltage appears, the lightning arrester will play
a protective role. When the protected device is running under
normal working voltage, the arrester will not work, and it will be
regarded as a circuit for the ground. Once the high voltage is
present and the insulation of the protected equipment is
endangered, the lightning arrester acts immediately and leads the
high voltage impact current to the earth, thus limiting the
amplitude of the voltage and protecting the insulation of the
electrical equipment. When the overvoltage is gone, the arrester is
restored to its original state quickly, so that the system can
supply electricity normally. The main function of the lightning
arrester is to reduce the voltage value of the protected equipment
through the action of parallel discharge gap or nonlinear
resistance, and to reduce the voltage value of the protected
equipment, so as to protect the power equipment.
Company profile
Thor is all about protecting against the damaging effects of power
transients. It is our goal and mission to connect our customer
challenges with high-quality, right-priced solutions and products –
completed by unrivaled customer service and technical support.
