Automatic Galvanized Steel Cable Tray Cold Roll Forming Machine
Normal Cable Tray Sizes
| No. | Width/mm | Height/mm | Thickness/mm | Length/mm |
| 1 | 150-600 | 50-150 | 0.8-1.5 | Any length |
1. Matching material: Galvanized or PPGI
2. Material thickness range: 0.8-2mm
3. Forming speed: 2m/min(include the punching and cutting time)
5. hydraulic station power: 22KW
6. Quantity of roller:20
7. Shaft Material and diameter: 80 mm, material is 40CR
8.Material Of the Body:400H steel. Wall Panel;20mm Q195 steel(all
with electrostatic spraying)
9.Tolerance: 3m+-1.5mm
11. Controlling system: PLC
12. Total weight: about 5 Tons
13. Voltage: 380V/ 3phase/ 50 Hz
14.Size of the machine: L*W*H 23m*1.5m*1.2m
15.Material of forming rollers: Gcr 15/Cr12, coated with chromed
treatment(you can choose the material as your request)
16.Material of cutter blade: Cr 12 mould steel with quenched
treatment 58-62℃
17:Tempreture:60
18, Equipment capabilities
It can according to the need to produce the steel width
(60mm≤§≤860mm), many kinds of specification electric cable bridges
and other structure product.
Product speed by punching: 2.55m/min
Continuous rollforming speed: 10-15m/min
Material thickness: 1~2mm
Material require: Q235 cold roll steel
Production line has automatic and manual two operating mode, may
realize the linkage and the partition revolution work.
19, Main composition of machine
This unit consists of the decoiler, ML-900 flatting, 200 punch,
die, servo feeding, guider, main roll forming machine, follow
cutting, cut-to-length part, recoiler, electrical control cabinet;
etc.
3.8 Electrical control
3.8.1 Main operation control cubicle
Amount: 1 set
Frequency conversion: 3sets(in main control cubicle, control
decoiler, flatting and roll forming machine)
PLC control: 1 set
8 inch liquid crystal touchscreens
All electrical element is the Mitsubishi original installation
brand
3.9.2 Assistant control cubicle
Amount: 3 sets (follow decoiler, flatting, roll forming machine)
Control styp: manual handle
4,Produce condition
capability: about 71.5kw
gas fountain: 0.9 cube/min
Production land area: 33m*3m
5,Machine Parameter
| NO. | Project | Unit | Parameter | Remark |
1 | Material | Type | High strength steel | | |
| Strength of material sheet | Map | ≥350 | |
| Thickness of material sheet | mm | 1.2~2.0 | |
| 2 | Size of production | mm |
Reference the picture | |
| 3 | Production speed | m/min | Punching speed 4m/min
Forming speed 10m/min | |
| 4 | Material of roller | | GCr15 quenching treatment | |
| 5 | Drive type | | Gear | |
| 6 | Power | kw | About 75 | |
| 7 | Electric control system | | PLC variable frequency control | |
| 8 | Dimensions(Length*width*height) | m | 55X4X3.9 | |
Service from BOSJ
BOSJ offer engineers to install and commision the machines at
buyer's factory,and also train your workers to operate the machine.
Guarantee: one year after finishing machine installation and commission at buyers'
factory.
24 hours response time
a) Mechnical engineering team with 10 actual working experience
b)Electrical engineering team with 10 actual working experience
