Electricity or Diesel Power Stator Varnish Dipping Machine Motor
Insulation
Application:
Pump motor stator,Industrial motors, household appliances motor
stator winding , transformer windings
and other coils insulation
Advantages:
1. Fully automatical expect loading/unloading stator, ensure stable
varnish stator consistency,quality
and ease the labor.
2. After dipping the paint stator film uniform, eliminating the
rubbing paint process,
which can save insulation paint varnish, solvents and labor cost.
3. Quick-drying insulating paint can shorten the production cycle,
energy and raw materials saved,
at the same time greatly improve the working environment of the
operator.
Parameter:
| Name | Unit | 130-16 | 130-26 | 130-46 |
| Station | pcs | 16 | 26 | 46 |
| Dipping depth | mm | 130 | 130 | 130 |
| Basket area | mm | 850×300 | 850×300 | 850×300 |
| Loading- bearing | kg | 80 | 80 | 80 |
| Pitch time | min | 1～90min adjustable |
| Heat rise time | min | <45 |
| Tunnel Tem. | ℃ | ≤160℃ |
| Dimension | m | 3.8×2.2×2.5 | 6×2.2×2.5 | 10×2.2×2.5 |
| Power | kw | 40 | 60 | 80 |
Stator varnish machine example:
Working position: 26
Dipping depth Varnish impregnation: 130mm
Rack loading area: 850*300
Rack loading weight: 80Kg
Pitch time: 1-30min adjustable
Heating time: <45 min
Tunnel working temperature: ≤150℃
Power consumption: 60
Dimension: 6*2.2*2.5
Weight: 5.8 Ton
We produce stator varnish machine in electricity power,diesel power
or gas,
It has two types mechanism in the varnish area
1. Varnish tank goes up and down which is driven by the screw rod
2. Varnish tank fixed and the chain goes down and up
Situation 1 is suitable for stator with dipping time requirement,
suppose the varnish dippin time is 2
minutes and pitch time is 5 minutes, stator don't need to stay
inside the varnish tank for 5 minutes
In situation 2, the varnish tank don't move and don't need
transmission, no drive needed,
Stator varnish machine which mainly applied to stator winding
insulation treatmen composed of machine
body, water cooler chiller and varnish supply tank.
Question and Answer:
Question:
We cannot recycle the varnish because the varnish is thickened
after the trickling process. The temp on
the armature surface is hot. The warm varnish is moving slowly
inside the tubes of the trickling pump. I am
wondering if the chiller can help to thinner the varnish so that it
can move more freely inside the tube.
Answer:
In the stator varnish and armature rolling and dipping
machine,chiller is helpful to solve above problem
Usually the varnish dipping machine for stator and rolling and
dipping machine for armature need chiller,
Because the heated workpiece is in the varnish which transfer heat
and rise varnish temperature,
The chiller will keep the varnish quality, no deterioration and
thinner.
Please click below picture to view video
