150mm Width Slot Cell Insulation Forming Cuffing Creasing And
Cutting Machine
Application:
Pump,compressor, hood electric , vending machines, wheelchairs,
medical beds, and treadmills induction motors stators islation
bending and cutting
Also cut insulation without bending for slotless motor as a isolation
cutter
Advantages:
1. Simple and easy to operate
2. Wide applied for bending and cutting different slot cell size
without tooling change
3. No maintenance needed, only polish or replace cutter after 2
year to 5 years usage
Parameter:
Feeding length 10~100mm
Cutting width <150mm
Cutting thickness < 0.35mm
Edge folded width 2.5mm~4mm
Weight: around 150KGS
Dimension: 500*900*1200mm
For WIND-IF insulation paper froming machine the feeding length is related to slot size total area length,
cutting width is usually stator stack length+ edge folded length *4
,
for a motor frame size below 132, the edge folded usually is around
3.5mm
For example, if stack length is 80mm, the cutting width is around
80+14 = 94mm.
Question and Answer
Is it difficult to increase the "feeding length" from 100 mm to 200
mm for example?
1. For standard machine the feeding length must be less than 100mm,
and we checked your stator lamination which you sent on Jan. 6th,
2016, they are in the range.
2. Only to cut the insulation without edge folding is easy to set
on machine,
You only need to ease the folding area by mechanical adjustment,
Please click below picture to view video
Photo:
