12 Slots BLDC Motor Stator 1.13mm AWG17 Copper Wire Needle Winding
Machine WIND-3A-TSM
(1) Application
Needle winding BLDC stators of Sewing Machine,Air conditioning
compressor, Refrigerator
compressor,water pump automotive application , fuel pump motor with
6 poles, 9 poles, 12 poles or
18 poles
(2) Advantages
Fast as three head
winding machine |
3 needles wind 3slots at same time,
wider can finish the winding in
2times for 6slots stator 3times for 9poles BLDC stator 4times for 12slots
|
Winding Range |
3 phase BLDC motor with same winding way for each phase,
Especially suitable for thick wire diameter above 0.8mm (AWG20)
Recently handled 1.13mm AWG17
|
Winding and Arraying |
Arraying can achieve compact winding, even resistance and better
motor
performance
|
(3) Feature
Brushless motor stator winding machine WIND-3A-TSM is designed to produce multi poles 3phase stator
Its winding track is in square shape,It does wires winding and arraying at same time and automatically.
The slots needle winding, arraying,indexing,place bridge wire,cut
wires are fully automatically.
The needle winding machine is very suitable for small slot width
and high slot filling rate stator production,
To get better efficiency and better motor product.
(4) Parameter
Wire diameter:0.08~1.2mm (AWG17~AWG39)
Stator ID:15~65mm
Core length:7-110mm
Turns No.0-99999
Operation option: stepping/Auto
Stator poles: 6 poles, 9 poles, 12 poles,18poles (Customized)
Air pressure:5~7kg/square centi-meter
Power:2KW, AC220V 50/60Hz
Weight: about 750kgs
Dimension: 1600(L)x1100(W)x1400(H)mm
Question and Answer:
1. Which type of stator needle winding shall we select for our
stator in attached drawing?
The winding machine WIND-3A-TSM with winding arrraying indexing
servo device
and angle swing cam device is very suitable for winding your stator
metioned in drawing,
it is very stable in winding big and small wire , heave or light
BLDC motor compressor stators
2. Can you also estimate the winding period of our design, how many stators can we produce in
one hour?
Per your winding data Number of turns 27, wire diameter 0.8mm,
the winding speed we suggest is 300RPM, and it take about 1mintutes
to get 1pc wound stator,
In one hour you can get more than 60pcs
3. What's the material list we shall provide for machine trail?
Below samples are needed for machine manufacturing and
commissioning,
1. Stator stack 5pcs without winding
2. Wound stator 1pc
3. Copper wire 1 roll enough for winding 15pcs stators
Below is example of wound stator
