Marble Floor Grinding Machine Surface Grinder Machine
Brief introduction
HW-G1 is designed as a floor grinder with edge function on both
sides. The machine is light and compact, for easy transportation
and set-up. You needn’t to be professional for handle this machine.
It is easy to use and maintain!
Ergonomic handle permits standing up working position to avoid back
pain and sore knees! Very balance of the grinding plate thanks to
the triangle design of stamping part. The machine with 70kg weight
could be brought anywhere easily and even stored in car trunk;
Parameters:
| Model: | HW-G1 |
| Voltage: | 220V 1phrase |
| Power output: | 2.2KW,3hp |
| Motor Brand: | China Wonder |
| Frequency: | 50/60HZ |
| Current: | 13A |
| Grinding Width: | 280mm/11” |
| Grinding Pressure: | 41KG/90.2lbs |
| Additional Weight: | N / A |
| Dust Port: | Φ 50mm |
| Motor Speed: | 1400rmp |
| NO.of Diamond Pad: | 6 pcs |
| Machine L*W*H: | 1100*420*1000mm |
| Net Weight: | 75KG/165lbs |
Features:
1, The electrical box protect ‘Schneider’ electrical element, and
‘Delixi’ start / stop / emergency buttons;
2, Stamping part is made of steel tube with 2.5mm thickness, making
sure of the machine’s stability;
3, The machine can be folded and put in the car trunk;
4, Vacuum cleaner can be connected.
Closer Look
After Sell Service
1. One year of warranty for machine.
2. In the warranty period, the spare parts are sent by DHL, which
is paid by Honway Company.
3. Out of warranty period, the spare parts are sent by DHL, which
is paid by customer.
4. Honway always store the spare parts of old models, in case that
the machine needs repair in future.
5. All gear boxes are tested 48 hours before it leaves factory.
6. We could send the technologists to distributors, for training
the after sell service staff and maintenance issues.
FAQ
Q: If the floor edge grinder could grind floor?
A: Yes, it can; its grinding width is 280mm and its grinding
pressure is 90.2 lbs;
Q: if HW-G1 could grind floor edge and leaves no margin at all?
A: G1 could grind floor edge, but leaves margin of 2mm, which is
the narrowest margin which the floor edge grinder could achieve. It
is impossible for any machine to leave margin 0mm.
Q: if HW-G1 could grind right edge and left edge?
A: Yes. It can; the two sides could grind floor edge;
Q: How about the floating cover of HW-G1?
A: The floating cover follow floor up and down, preventing dust
from entering work site.
