Stainless Steel Material of UV Weathering Chamber with Touch Screen
TEMI880 Controller
Technical Data Download: iqualitrol UV Accelerated Weathering Test Chamber
Brief Introduction:
This chamber is equipped with fluorescent UV lamp which can
completely simulate the UV spectra of sunlight, thus to simulate
materials in discoloration and decline of brightness and strength
with devices for temperature control and humidification.
The UV spectra may cause impairments like cracking, flaking off,
pulverization and oxidation, as well as factors such as high
temperature, high humidity, condensation and darkening period.
Meanwhile, with the coordination between UV-light and humidity,
single light capacity and moisture capacity would be weakened or
deactivated in the chamber, which can be widely used for evaluating
the weather ability of products.
The machine features in well equipment with UV simulation, low
maintenance cost, easy operation, automatic test running period by
program controller, high degree of automation, good lamplight
stability and high repetition of test result etc.
Features:
• With LCD Programmable touch screen controller, programmable of UV
time, condensing moisture, temperature, rain (spray).
• The moisture includes both condensing humidity, to simulate dew,
and water sprays. The light in the chamber is created by
specially-designed fluorescent UV bulbs to simulate the effects of
sunlight.
• With cycling control of light and moisture at controlled
temperatures.
• With condensation system
• With heater
• With sprayer
• Test specimens are mounted in convenient snap-right holders
• 40W fluorescent UV lamps
Affordable:
The UV chamber is economical to purchase and to operate, because it
uses:
• Low cost, long life fluorescent UV lamps
• Ordinary tap water for condensation
Sunlight Simulation:
• UVA-340 Lamps simulate sunlight in short wavelength from 295 to
365nm
• UVB-313 Lamps for quick acceleration
• Light Intensity is controllable
Moisture Simulation
• Hot condensation system
Rain Simulation
• Water spray system with nozzle simulate the damage causes by rain
Temperature Control
• With heater to increase the temperature to accelerate the
destruction effect caused by light and moisture
Testing Standards:
The machine is designed and manufactured in accordance to multiple
standard codes, such as GB/T14522-2008, ISO4892-3:1994,
GB/T8427-1997 (Namely to ISO105-B02) GB/T8430-1997(Namely to
ISO105-B04 ), GB/T14576-1997, AATCC16 JIS 0843.which serves as the
standard of technical indicators.
Optional Features
• Solar Intensity Control
Optional Lamps Type:
| UVA-340 | Especially suitable for comparison tests of the different
formulations. Recommended for most plastics, textiles, paints,
pigments, and UV stabilizers and other products testing, as also
outdoor test results correlation test. |
| UVB-313EL | Suitable for the quality control and research, development
applications, recommended for the testing of some durable
materials, such as roofing paint. |
| QFS-40 (F40 UVB) | Test the vehicle exterior paint. |
| UVA-351 | Suitable for the glass solar UV simulation, Recommended for use in
automotive interior parts, textiles and ink testing. |
Technical Specifications:
| Model | QSV-UV3 (QUV-184) |
| Chamber Dimension | 1150*400*400(mm), splayed |
| Material | Main Body, SUS304 for inside and outside chamber |
| Lamps | UV lamp: UVB 8pcs |
| Temperature range | RT+10℃-70℃ |
| Lamps Using Life | About 5000 hours |
| Wavelength of the spectrum | UVA340: 295～365nm /UVB313: 280～313nm |
| Humidity Range | According to the UV aging standard, humidity is not involved. The
humidity is only used to simulate the morning dew condensation
environment (this function is optional) and has no other use. The
humidity of the UV fading machine we produce is in an energy-saving
state at 50-70%RH. |
| Simulation cycle | 0-10000min, adjustable |
| Spray Time | 0-10000min, adjustable |
| Power Supply | AC220V/50Hz, power 3KW |
| Lamp Power | 40W, |
| Radiation Intensity | (280-400nm) 0.5W/m2 (Radiation meter is optional) |
| Trigger power | 40W, AC220V/0.18A |
| Test blackboard temperature | 63℃±3℃/83℃±3℃ |
| Temperature uniformity | ≤3℃ |
| Rain spray cycle | Spray 18min, pause 102min or Spray 12min, pause 48min (adjustable) |
| Spray pressure | 78~127Kpa |
| Controller | Programmable controller and large touch screen communication
control |
