New Generation Vulcanizing Tank For Tire Regrooving Equipment
Product instruction
Temperature, pressure, time, adopt the automatic control, stable
and reliable performance, convenient use, is a traditional
vulcanizing tank equipment. 0.6-3.0Mpa design pressure, design
temperature 150-220’C, 600-5000mm in diameter, length between
1000-60000mm, according to the product technical requirements for
individual design customized for clients. Steam tank bottom enters,
imported by the automatic control valve at the tank bottom setting
steam, the steam vertical diffusion tube arranged in the tank
bottom, small and medium-sized mouth diffusion tube (3mm, 4mm,
5mm)arranged according to certain rules and Angle offset, to ensure
that the steam into the tank after the temperature even spreading
around, prevent the uneven steam diffusion caused by the different
product quality. After setting process, automatic control system
for heating ,heat preservation, sulfide, vulcanization after send
out sound light alarm and automatically stop working.
Machine introduction of Tire Retreading Equipment:
Electric retread tires equipment is a pressure vessel with speed
open door, the autoclave openings sealed with inflatable silicone
ring or internal pressure self-tight rubber pad. Mechanical or
manual gearing is used to lock and open the lid, reasonable
structure, convenient operation, good sealing performance, the
temperature in the tank is uniform, furthermore, complete safety
accessories (equipped with safety interlock device).
Features of Tire Retreading Equipment:
1. Automatic alarm, Automatic timing
2. Optional: electrical oil and steam heating
3. Automatic door system and three t safety interlock
4. Automatic compensation function on temperature, pressure
5. Multifunctional system controls temperature, pressure, curing
time
Product instruction
Temperature, pressure, time, adopt the automatic control, stable
and reliable performance, convenient use, is a traditional
vulcanizing tank equipment. 0.6-3.0Mpa design pressure, design
temperature 150-220’C, 600-5000mm in diameter, length between
1000-60000mm, according to the product technical requirements for
individual design customized for clients. Steam tank bottom enters,
imported by the automatic control valve at the tank bottom setting
steam, the steam vertical diffusion tube arranged in the tank
bottom, small and medium-sized mouth diffusion tube (3mm, 4mm,
5mm)arranged according to certain rules and Angle offset, to ensure
that the steam into the tank after the temperature even spreading
around, prevent the uneven steam diffusion caused by the different
product quality. After setting process, automatic control system
for heating ,heat preservation, sulfide, vulcanization after send
out sound light alarm and automatically stop working.
Machine introduction of Tire Retreading Equipment:
Electric retread tires equipment is a pressure vessel with speed
open door, the autoclave openings sealed with inflatable silicone
ring or internal pressure self-tight rubber pad. Mechanical or
manual gearing is used to lock and open the lid, reasonable
structure, convenient operation, good sealing performance, the
temperature in the tank is uniform, furthermore, complete safety
accessories (equipped with safety interlock device).
Features of Tire Retreading Equipment:
1. Automatic alarm, Automatic timing
2. Optional: electrical oil and steam heating
3. Automatic door system and three t safety interlock
4. Automatic compensation function on temperature, pressure
5. Multifunctional system controls temperature, pressure, curing
time
