TG6-36Q 40.5kV Epoxy Resin Shield Spolt Bushings with KYN61
Switchgear
1. We are specialty on epoxy resin medium voltage and high voltage
components, such as 10KV, 24 KV and 40.5KV Circuit Breaker , Load
breaker switch , Disconnecting Switch , Epoxy resin switchgear
bushing , contactor box , insulators and transformer . 630A, 1250 A
,2500A , 3150A and 4000A contact box , club contact , fix contact,
arm contact and jaw contact . 630A and 1250A VS1 circuit breaker .
630A and 1250A ZN85-40.5 circuit breaker . 12KV and 24KV earth
switch. KYN28A-12 and KYN61 high voltage switchgear components .
2. In pouring, pouring material is the key. It has a great
influence on the reliability and stability of cemented pole. For
example, Xiamen Huazhong Electric Switching Co., Ltd. uses the
resin materials of Vantico, Switzerland, and adopts different
formulas according to different current, etc. to meet different
working conditions .
3. The APG process includes three processes: pre-mixing, automatic
pressure gel, and solidification after molding.
4. Applicable system: 35 KV or below voltage level of the ground,
small resistance grounding, arc coil grounding, direct grounding
system;
Protection range: not only can be used for line protection, such as
line protection, but also can be used for, PT, main change reserve
protection, motor, capacitor, reactor protection .
| Item | Name | Rated voltage (KV) | Rated frequency(Hz) | Frequency withstand voltage 5 min (KV) | Local discharge (pc) | Creep distance (mm) | Dispute bend (kN) | Lighting impulse withstand voltage (KV) |
| 1 | | | | | | | | |
| | | | | | | | |
| 5 | Wall bushing (260*395) | 40.5 | 50 | 98 | ≤10 | ≥840 | ≥10 | 185 |
