DRS Low Temperature Flame-Resistance Heat-Shrinkable Tube With
Copper Row
The silicone tube and the silicone rubber tube are the same thing,
just called different. The utility model relates to a
general-purpose heat-shrinkage sleeve made by using two-component
high temperature silica gel as the base material, adding a fixed
ratio additive, and forming material by several vulcanization. It
has the functions of high temperature shrinkage, soft flame
retardant, insulation and corrosion prevention.
When heated, the inner diameter of the casing quickly shrinks to
half, and the protected electronic parts are tightly encased in the
casing to protect the electronic original, acting as insulation and
temperature resistance. It is widely used in various wire harness,
welding spot, inductance insulation protection, metal pipe, rod
Rust, corrosion, etc. Voltage class 600V. Material can be divided
into PE heat shrink sleeve, PTFE heat shrink sleeve, silicone heat
shrink sleeve, PVC heat shrink sleeve, pet heat shrink sleeve,
irradiated cross link PE heat shrink sleeve, 10KV high pressure
master protection heat shrink sleeve, 35KV high pressure master
protection heat shrink sleeve, double wall heat shrink sleeve, heat
shrink sleeve .Different types of thermal shrinkage time and
temperature are different. PVC and PET type, minimum contraction
temperature 35 ℃, but at this temperature is very weak contraction,
so this type of products should be stored below 30 ℃. The minimum
temperature of rapid contraction is above 90 ℃.
| Shrunk Temperature | 100-110 |
| Tensile Strength | 12Mpa |
| |
