Description :
FC / UPC fiber optic connectors Quick feild assembly connector for patch cable
Fiber Fast Connector is used for field assembled optical fiber
connector ,widely used in fiber to the home (FTTH) access optical
networks,to assemble with drop cable quickly.
Technical Parameters
The field assembly optical connector is designed to simplify the
connection without fusion splicer. This connector is quick assembly
which requires only normal fiber preparation tools like cable
stripper and fiber cleaver. The connector adopts Fiber Pre-Embedded
(FPE) technique with superior ceramic ferrule.
| Item | Paramete |
| Cable Scope | 3.0 x 2.0 mm Bow-type Drop Cable |
| Fiber Diameter | 125μm ( 652 & 657 ) |
| Coating Diameter | 250μm |
| Mode | FC |
| Operation Time | about 15s(exclude fiber presetting) |
| Insertion Loss | ≤ 0.25dB(1310nm & 1550nm) |
| Return Loss | ≤ -45dB |
| Success Rate | >98% |
| Reusable Times | >10 times |
| Tensile Strength | >5 N |
| Tighten Strength of Naked Fiber | >10 N |
| Teperature | -40~+85°C |
| On-line Tensile Strength Test (20 N) | IL ≤ 0.3dB |
| Mechanical Durability(500 times) | IL ≤ 0.3dB |
| Drop Test(4m concrete floor, once each direction, three times
total) | IL ≤ 0.3dB |
Fiture :
High performance
Minimum tooling requirements
Easy on-site installation
Pre-embed fiber
Re-usable in the field
No epoxy or polishing required
Low insertion loss
High return loss
Low cost
Reliability
Low environmental sensitivity
Ease of use
Application: Datacom telecom measurement equipment single-mode
lasers ONU FTTH projects
Packing
Company profile
Quality control :
Delivery and payment
More products :
Any questions , you can feel free to cotnact us by the information
as below :
Michelle zhang
cell/WhatsApp : +008615800028772
skype : michellezhangll@163.com
mail : sales01@newlightfiber.com
Wechat : z15800028772
