98% Accuracy GPRS SD Card Bus People Counter with 1 / 2 / 3 / 4
doors for City Buses
Why choose the bus people counter system?
- with double lens for each counting camera .,add much higher
accuracy.
- Suitable for 8V-36V power supply.Especially for bus /school bus
application.
- Just count people not count animals or object.
- Developed by ourselves ,with patent protection.
- 98% up accurate,High accuracy despite crowded group
- Not affected by clothes color and passenger height etc
- Accurate counting for On and Off through Front and Back door
- Automatically generate statistic report
- Easy installation and uninstallation
- More accurate surveillance and more effective management on ticket,
conductor and driver.
Our GPRS Bus People Counter is an automatic bus passenger counting machine with high accuracy
(95% -98%), which is developed based on binocular stereo vision
technology and intelligent video analysis technology.
With a passenger counting system, transport managers gain accurate
key performance measures like passengers per mile and number of
passengers per day.
For every cycle time from door-open to door-close, the passenger
number of get-on or get-off with time&date and gps positioning
information will be stored into SD card.
And all the counting data(including passenger nubmer, time, date,
gps positioing infomation) will be sent to the server or 3rd-party
application server(need customization) through the 2G wireless
network.
We will provide the protocol to integrated with your third-party
system with RS232 and RS485 port.
Counts two passengers at once
A single sensor is able to function properly even if a wide door
allows two passengers to get on/off at the same time.
Stable accuracy more than 95%
Accuracy is based on average accuracy of an actual vehicle count
(in our recommended environment).
*Note: Accuracy may vary depending on the installed environment and
boarding/alighting conditions.
Outputs live images
The camera's video output function allows viewing of the conditions
near the middle door (back door), which is difficult to see, and
also records the images in the video event data recorder.
Bus People Counter Description&Specification:
System: Linux
CPU: TMS320DM6446
Operation Interface: OSD with mouse and remote control
Video Counting input: Max 2 channels
Video Counting output: 1 channel
Accuracy: 95% up
Operating voltage: DC 8—36V
Operating power: ≤4W
Operating temperature: -20°C -- +80°C
Operating humidity: 10% -- 95%
USB port: Standard 2.0
Counting input port: Aviation
Bus People Counter includes the whole suit and installation guide below
1. Main Unit
Counter Processor(brain), Mounted at the bottom of seat or ceiling
of bus, process and calculate the data, send to SD card storage or
GPRS&3g
2. Binocular Camera
Mounted on the ceiling of the doors, counts passengers get in or
out of the bus.
3. Door Sensor
Door open/close sensor, is used for sensing the door open or close
status.
Wire Connection
1. connect “CAM1” to “AV1” ; connect “CAM2” to “AV2” ;
2. connect “CAM3” to “AV3” ; connect “CAM4” to “AV4” ;
This is pure counter system in neutral package. The picture below
shows the family of pure counter system.
Install counting camera on top of the door
Find the suitable point on top of the door
1 If the bus has 2 doors, then use 2 counting cameras.
If one door please only connect counting camera No.1.
2 Vertical principle. It requires to face the counting camera
vertical toward the ground. Use the bracket to adjust until it is
vertical. The minimum angle for each single adjustment is 2.5
degree for the easiest adjustment purpose.
3 There are 4 holes on the back of the counting camera for easy fix
purse by screw. M2.5 X 5 screw is recommended. This design is for
easy fixing by means of other tools such as normal camera bracket,
customized boom etc.
4 Make sure the counting camera is fixed on the center of the top
with range 220 centimeter (minimum) from top to pedal.
5 For good performance, the lens should be selected according to
target vehicle. Firm and stable feature are high demanded for the
camera installation.
Platform show
Notice: If you buy our 3G counter(with mdvr together), you will use
our platform ;if you buy our GPRS counter/counter ,also you can use
our management platform tool ,also you can use your own platform
with our protocol by RS232/485 interface.
Please contact us for specific manual in details
Why choose the system?
- with double lens for each counting camera .,add much higher
accuracy.
- Suitable for 8V-36V power supply.Especially for bus /school bus
application.
- Just count people not count animals or object.
- Developed by ourselves ,with patent protection.
- 98% up accurate,High accuracy despite crowded group
- Not affected by clothes color and passenger height etc
- Accurate counting for On and Off through Front and Back door
- Automatically generate statistic report
- Easy installation and uninstallation
- More accurate surveillance and more effective management on ticket,
conductor and driver.
