Portable Folding Room Dividers Office Movable Partition Wall
Description:
The operable wall is an individual panel partition wall system,
designed to maximize noise reduction whilst manipulating interior
space. 56dB noise reduction is achieved with a combination of
operable top and bottom seals, high performance multiple and a
panel assembly design that allows an acoustic break between the
frame and outer layer. The panels can be supplied with almost any
surface finish, including MDF board bare finish, acoustic fabric
and leather, melamine.
Freature:
Easy To move and soundproof
Thanks to the exclusive system: Polymer coated , self-lubricating,
wear-resistant ball bearing trolleys.
Technical reliability
In its versions, range has undergone the most stringent endurance
and mechanical resistance tests in laboratories or in own Test
Center. 3-years warranty for parts and labour.
Quick to install
Tool locking of top and bottom rubber seals thanks to a manual
system in each panel.
Framework (stylist)
Aluminium profiles that become totally invisible when flat by means
of a hollow joint system.
Technical information:
| Panel Suspension | Top hanging system without the need for a floor track. |
| Panel Width | Each panel 600mm-1200mm. |
| Track | Aluminum Or Steel Track |
| Roller on panel | Single or Double Roller |
| Panel Frames | Heavy-duty steel-gusseted aluminum inner frames reinforced with
full height. |
| Top and bottom seals | Top and bottom pressure retractable seals ensure effortless moved
and locked. |
| Module | 700mm - 1200mm maximum. |
| Panel stacking | Numerous panel stacking options for complete flexibility. |
| Panel Surface | MDF,Plywood, woven fabric, Leather,Natural wood veneer,
Melamine,Wood moldings, etc. |
| Finishes | Satin anodized or polyester powder coating to all exposed aluminium
components available in a wide range of colour as standard. |
Partition pass door details:
The partition of the door, a kind of door, is used in the
decoration of partitions; it plays the role of disassociation,
guidance, and transition in the two separate spaces; it is the link
of connecting space.
There are many kinds of partition doors, including closet doors,
sliding doors, folding doors, sliding doors, moving track doors,
sliding doors in closets, partition sliding doors, folding sliding
doors, swing doors, sliding doors, cabinet doors, etc. The most
commonly used in high compartments and glass partitions are
tempered glass doors, split spring doors and hinged doors.
Partition doors are used in many places. This is also a factor in
the various types of barriers. For example, it can be seen in the
hotel's high partition, office partition, glass partition system
partition wall, mobile partition. In short, as long as it is
involved in construction, urban planning, building materials,
decoration and other industries, most of the needs will be applied
to the partition gate.
The partition door material may be metal, glass, composite board,
fire board, gypsum board, flame-retardant splint, plywood, and the
like. The partition door frame can use all 6063 GB aluminum
extrusions. Material, oxide film thickness, surface treatment
quality all meet the GB/T5237-2000 standard; can also be done in a
frameless manner, directly with hinged glass door hinges or fixed
parts.
Pay attention to following information:
The main function of using the active partition is to separate the
space, add some shelter to the open space, add a layer, and also
play a role in sound insulation and beautification. Therefore,
partitions are needed in many places in the room. When using the
active partition to partition, pay attention to three aspects:
1. The main purpose of the use of partitions is to provide sound
insulation and to take into account the appearance of sound
insulation. Therefore, for the design of the partition, we must put
the sound insulation function in the first place. On the basis of
satisfying the practical function of sound insulation, we must
reconstruct the interior design style and work hard to make a
beautiful and practical partition.
2.The use of the partitions are movable removable partitions, so do
not bear the function of load-bearing, so the degree of freedom of
the shape is very large, it is recommended that the majority of
businesses in the selection of partition should pay attention to
the height, length and actual and other changes unified.
3.Pay attention to the mix of colors. The partition is a part of
the entire space, and the color should be in harmony with the basic
part of the space. In general, after the style is determined, will
design and process the corresponding event partition based on the
overall style of the event box. Make it a perfect fusion.
