Titanium Heat Exchanger Pipe ASME SB338 Grade 2 Grade 9 Precision
SeamlessTitanium Tube
Description
Titanium tubes are the ninth most abundant element in the earth’s
crust and the seventh most abundant metal. Its low density,
slightly over half that of steel, and its high strength combination
is the reason for the metals growing preference in both military
and commercial aircraft. The alloying of titanium tubing with
elements such as aluminum and vanadium increase the strength of
titanium while at the same time retains its weight advantage over
steel.
Titanium is classified in two categories, commercially pure and
alloys with additives such as aluminum and vanadium. We are a
titanium tubing manufacturer and supplier, and our inventories
consist of both types and cover both seamless and welded methods of
manufacture.
TITANIUM TUBE FOR INDUSTRIAL APPLICATIONS:
Marine Industry
Chemical and petrochemical industry
Pulp and paper industry
Sporting goods - golf shafts, bicycle frames, etc.
Medical industry
Nuclear industry
| Grade | Gr1, Gr2, Gr9, Gr11, Gr12, Gr16, Gr17
|
| Dimension | OD*Thk*L (10-114)*(0.4-10)*(100-15000)mm
|
| Manufacturing method | Cold rolled |
| Condition | Annealed(M)
|
| Features | Light weight, excellent corrosion resistivity, strongly
heat-resistance, high strength.
|
| Inspection | Ultrasonic testing, Hydrostatic testing, Flattening testing, visual
surface inspection, Dimensional inspection, tensile properties
inspection and Chemical elements analysis. |
Titanium Grades:
Titanium Grade 1 is an unalloyed, low strength titanium product
containing low oxygen with high formability; this titanium grade is
used in airframes, heat exchangers and desalination units.
Grade 1 commercially pure titanium wire is especially acid-cleaned
for anodizing applications but is also ideal for a wide range of
fabrication uses. It is ductile and can be formed with a bit of
effort. The metal is corrosion-resistant and hypoallergenic.
Titanium Grade 2 is an unalloyed, medium strength titanium product.
This titanium grade is used in airframes, aircraft engines, and
marine parts; good weld ability and corrosion resistance are its
distinguishing characteristics.
Grade 2 is the commercially pure titanium used in most of the
chemical processing plants and is cold formable. Grade 2 plate and
sheet can have ultimate tensile strength at and above 40,000 psi.
Titanium Grade 3 is an unalloyed, high strength, titanium product
providing excellent corrosion resistance and good weld ability.
This titanium grade is primarily used in airframe and aircraft
engine parts.
Titanium Grade 4 is the highest strength pure unalloyed titanium
product. This titanium grade is used almost exclusively for
airframe, aircraft engine parts, marine, surgical implants,
hydraulic tubing. Good formability and corrosion resistance are its
hallmark.
Titanium Grade 5 (6AL-4V) is an alloyed titanium product containing
6% Aluminum and 4% Vanadium; is a medium strength product. This
titanium grade is predominantly used in airframe and turbine engine
parts; and for use in surgical implants.
Grade 5 is the aerospace grade and is not cold formable, so it is
used more often when no forming is needed. Grade 5 aerospace alloy
will have ultimate tensile strength at and above 120,000 psi.
