Sliding Bearing Powder Metallurgy Parts PMP02-2
Description:
The raw material of powder metallurgy parts is iron-based powders
or copper-based powders. First step, we use the precise continuous
mold to manufacture the part’s workblank, then after the sintering
and polishing process we could get the finished powder metallurgy
parts.
The finished powder metallurgy product’s density is a little lower
than the solid metallic product, but the powder metallurgy product
still has the good mechanical properties. And the most important
thing is that there are many very small holes in the body of powder
metallurgy product, so after the process of immersion oil the the
powder metallurgy product have good self-lubricating property.
Specification:
| ITEM | INFORMATION |
| TYPE | Powder Metallurgy Parts |
| STYLE | SLIDING BEARING |
| CODE | PMP02-2 |
| RAW MATERIAL | Iron-based powder / copper-based powder |
TEMP. DISPLAY RANGE | 0~300 °C |
Applications:
1. Home Appliances
2. Medical Apparatus and Instruments
3. Automobile parts
4. Other Machines
Good economy, saving material
1) We use the continuous mold to manufacture the powder metallurgy
product’s workblank. During the production, there re nearly not any
additional material loss during the production, and the very few
additional powders could be recycled to produce the new product. So
this technology is the best saving-cost manufacture mode for
mechanical products.
2) The continuous mold and automatic press machines could
efficiently manufacture product and reduce the production cost.
Good durability and long working lifetime
1) Although the finished powder metallurgy product’s density is a
little lower than the solid metallic product, but the powder
metallurgy product still have enough mechanical strength.
2) There are many very tiny holes in the body of powder metallurgy
product, so after the process of immersion oil the the powder
metallurgy product have good self-lubricating property.
