Where can we order fast filler machine for electric heater?How to
buy fast filler machine for electric heater?Is there a heater machine factory make fast filler machine for electric heater? How to custom fast
filler machine for electric heater from China?
TLD-24 Fast Filling Machine is a stand-alone order mechanism. It
works in the same way with the TLQ-24.Both TLD-24 and TLQ24 are of
the single-direction mechanism, namely, single-deck guiding pipe.
It equips mandrel inside the pipe, which serves to locate the
heating wire module. At the top of the pipe, there is a linear
cutting binding head weld; it is coupled with the hole inside the
pipe. Magnesium powder flow down from the outside of the guiding
pipe. Great capacity and accelerative filling speed are the main
advantages of this machine, while density deficiency is the chief
disadvantage, which usually is around 2.15g/cm3. The binding head
would be easily stuck inside the pipe which leads to the failure of
filling if the density is increased. The machine adopts gear motor
to drive the rising of the guiding pipe mechanism, which is more
stable comparing with the gas liquid turning mechanism. This
machine uses PLC touch screen to control, the length of filling
will be more correct.
The machine suitable for short tubes in large diameter.
Fast filling: about 6000-8000 PCS / 8 h.
TLD-24 Fast Filling Machine is a stand-alone order mechanism. It
works in the same way with the TLQ-24.Both TLD-24 and TLQ24 are of
the single-direction mechanism, namely, single-deck guiding pipe.
It equips mandrel inside the pipe, which serves to locate the
heating wire module. At the top of the pipe, there is a linear
cutting binding head weld; it is coupled with the hole inside the
pipe. Magnesium powder flow down from the outside of the guiding
pipe. Great capacity and accelerative filling speed are the main
advantages of this machine, while density deficiency is the chief
disadvantage, which usually is around 2.15g/cm3. The binding head
would be easily stuck inside the pipe which leads to the failure of
filling if the density is increased. The machine adopts gear motor
to drive the rising of the guiding pipe mechanism, which is more
stable comparing with the gas liquid turning mechanism. This
machine uses PLC touch screen to control, the length of filling
will be more correct.
The machine suitable for short tubes in large diameter.
Fast filling: about 6000-8000 PCS / 8 h.
Com.: Zhao Qing City Feihong Machinery & Electrical Co.Lt
Add.:Shui Ji Village, Dachong,Duanzhou District, Zhaoqing City,
Guangdong Province, China
Email:info@tubemachines.com may@zqfeihong.com
Mob/Whatsapp/Wechat : (86)13424485791
Tel.:(86-758) 2777969
Web.:http://tubemachines.com
