SS tank 350L CIP clean in place system with heating and touch
screen control
Product description
Full name of CIP system is cleaning in place system, it is a
system, in which, producing equipment (tanks, pipes and valves
etc.) and whole production line is cleaned and disinfected
circularly in a closed loop without being dismantled or open. It is
applied for cleaning of equipment and pipes industries of dairy,
cosmetic and pharmaceutical products. CIP cleaning system is
composed of acid tank, alkali tank, hot-water tank, pure-water
tank, back-water tank, thick-acid tank, thick-alkali tank, heat
exchanger, pumps peripheral valves and pipes. These tanks can be
allocated according to technical requirements. Generally, the CIP
system only comprising acid tanks, alkali tanks and hot-water tanks
is sufficient for requirement of cleaning.
Widely used in dairy, beverage, juice, wine industries for the
cleaning of the tanks, piping, pumps, machines, equipment, complete
production line where Cleaning-in-Place is required.
The CIP cleaning system can be used as a resolveless instruments,
also it can be used as easily operating and safely automatic
cleaning system, so it is almost recommended by the all of food
,drinks and medicine processing industry. The CIP system can not
only clean the medicines, but also control the microorganism's
cleaning.
CIP System Advantages:
1. It can make the production plan reasonable and improve the
produce ability.
2. To compare with the hand-wash,it doesn't influence the cleaning
result because of the worker's difference,on the contrary,it can
improve the products'quality.
3. It can prevent the dangers of cleaning work,so that we can save
the work force.
4. It can save the cleanser,the steam,the water and the cost of
production.
5. It can extend the service life of the machine parts.
6. It includes three types,one is the handwork system,one is the
semi-automation system,and the other is the whole-automation
system,so it is easy for customer's selection
1. Cip System:It is the tank-cleaning dvice for the rapid
automation process. Pre-set system contrls the cleaning rprocess
from the beginning to the end.It is simple, fast, and cleans
thoroughly. The sanitary valves concerns as well as structure.
2. Equipment:Acid tank, alkaine tank, and warm warer tank one for
each, the recycing of detergents and adjustment of temoerarute, and
liquid level are preset.
CIP cleaning device as neither decomposition production equipment,
and can be used simple operation mether safety automatic cleaning
system, almost was introduced to all the food, beverage and
pharmaceutical and other factories.
CIP cleaning system can clean machine, tanks, pipeline.
CIP cleaning system:
1. can make the production plan rationalization and production
capacity.
2. compared with the hand, not only the differences due to the
operators can also affect cleaning effect, improving the product
quality.
3. can prevent the dangers of the claning, save labour.
4. can save cleaning agents, steam, water and product cost.
5. can increase the service lift of the machine parts.
6. CIP cleaning system have manual type, semi-automatic and
automatic type operating to choose.
| CIP Tank size | 100L-10000L |
| CIP tank type | Alkali tank, acid tank, hot water, |
| Cleaning recycles | circuit |
| Heating method | Coil pipes inside, p |
| Automatic types and characteristics | Full Automatic | 1. Flow rate auto control;
2. Temperature auto control;
3. Auto compensate the cip liquid level;
4. Auto compensate the liquid concentrate;
5. Cleaning liquids auto transfer;
6. Auto alarm |
| Semi-automatic | 1. Temperature auto control
2. Electrical control with manual operate the other matters. |
| Manual | Manual operate on the cleaning process |
