Good Finish 150mm Turbine Style Abrasive Disc Segment Deburring
Nylox Brush
1. Outer Diameter available from100 to 600mm for Disc Brushes.
2. Optional coupling available for fitment in various machines.
3. Material for Base –Wood, HDPE, PVC, Plastic, Nylon, Teflon,
Aluminum etc.
4. Density of Bristle is optional as LOW, MEDIUM, and HIGH.
5. Type of Bristle or Brush Strings- Nylon, Polypropylene, PVC,
PET, Teflon, PVC, Abrasive 6. Silicon Carbide Bristle, Abrasive
aluminum Oxide Bristle, Steel Wire, S.S Wire, and Brass Wire etc
7. Disc Brushes with Custom Sizes can be manufactured at short
notice.
Dimensions:
Abrasive Disc Segment Deburring Nylox Brush
Outer Diameter
| 150mm |
Inner Hole
| 25.4mm |
Base thickness
| 20MM |
Bristle height
| 25mm |
Bristle Dia.
| 1.0mm |
Applications:
• Ideal for deburring any flat machined auto parts
• Deburring face milled casting and forgings
• Edge blending and edge radiusing operations
• Fine blank deburring
• Engine block and cylinder head deburring
• Surface finish and removing burrs on hydraulic components
• Rust and scale removal
• Clean pre-cast concrete moulds
• Sanding and texturing wood surfaces
• Surface conditioning alloy wheels
Abrasive Brushes are used in marble, granite, limestone slate,
sandstone, travertine and so on. Through grinding the surface of
the stone, it could get the archaized effect.
It adopt from DuPont U.S.A (Nylon 612 with grit inside),it has the
advantage of high speed of aggressive, long life and good polish
effect which have been sold far Europe,Asia,Middle East and so on
Grain:Steel,Steel+36#,24#,36#,46#
,60#,80#,120#,180#,240#,320#,500#.
