Stainless steel screw juicing machine for canned product preparing
Discription:
use
The machine is suitable for squeezing tomatoes, pineapples, apples
and oranges and other fruits and vegetables juice.
parameter
| Model | Capacity | Power | Dimension mm |
| DX-0.5 | 0.5 T/H(APPLE) | 1.1KW | 935×350×650 |
| DX-1.5 | 1.5 T/H(APPLE) | 4.0KW | 1560×450×1340 |
| DX-2.5 | 2.5 T/H(APPLE) | 11KW | 2200×600×1560 |
The main structure principle
Juicing: The main component is to go nuclear after the pulp, juice,
skin through the bucket into the screw juicer, spiral, spiral slag
outlet along the direction of the bottom diameter gradually
increased while the pitch is gradually reduced, when the material
is spirally propelled, Due to the volume of the screw chamber is
reduced, the formation of the material squeezing. The direction of
rotation of the screw spindle from the feed hopper to slag tank
direction, clockwise. The raw material is fed into the hopper and
pressed under the helical propulsion. The squeezed juice flows
through the strainer into the bottom juice holder, and the waste is
discharged through the annular gap formed between the spiral and
the conical part of the pressure regulation. The pressure head
moves in the axial direction to adjust the size of the gap. For
clockwise (from the slag tank device to the feed hopper to see
turning the hand wheel bearing seat, the pressure regulator head to
the left, the gap is reduced, otherwise the gap becomes larger.)
Change the size of the gap, that is, adjust the slag Of the
resistance, you can change the slag rate, but if the gap is too
small, under strong extrusion, part of the slag particles and the
juice will be squeezed through the filter, despite the increase in
juice, but the relative decline in the quality of juice, voids
Depending on the size of the user specific process requirements may
be. So as to achieve the purpose of automatic separation of juice
and slag.
Shipping:
Q&A
Q1: How to visit our Factory? (not a trade company)
A: Shanghai Airport→Pick you up
Q2: How does your factory do the quality control?
A: “QUALITY FIRST " We purchase qualified parts, test the machine
every step when manufacturing. We have SGS certification and ISO
certification.
Q3: How about the installation?
A: Option 1, our engineer install the machines for you, also train
your staff until they can run the machine independently.
Option 2, you learn this in our factory.
Q4:Do you have after-sale service?
A: 1 Year Warranty and timeless maintenance service.
Q5: How about the payment term?
A: Payment term:1, T/T 30% , 70% before shipping.
