Non-standard Hot Dip Galvanizing Line Equipment Plant Machine with
Customers Local Voltage
Hot galvanizing line is used to produce corrosion resistance and
smooth layer on the surface of raw pipes after cleaning. The main
equipments include: drying oven, heating furnace,galvanizing
machine, drawing machine, drawing upward unit, pulling out roller,
moving device, internal blowing with steam and air combination,
laying flat device, cooling tank, spraying conveyor, mark conveyer,
blue ring machine, electrical device,eyc. our company can produce
hot galvanizing pipe mill of spec. between 1/2 inch to 10 inches.
1. Most of the equipment are packed by wooden boxes to reduce
abrasion.
2. If the size of whole equipment is suitable for container ship
usually by containers.
3. If the size is too big usually by bulk ship.
4. Freight ways are based on reducing cost for you!
15 years experience
Gantry 5's administrative interface has been completely.
Quality guarantee
The admin provides multiple options for styles, layout, particles.
24-hour service
Salient is built with a responsive layout, which means it
automatically.
Technical Process:
Raw material (welded pipes) —— Derosination —— Acid treatment ——
Water cleaning —— Applying impregnant —— Drying —— Zinc hot-dipping
—— External blowing —— Internal blowing —— Air cooling ——Water
cooling —— Passivation —— Drying —— Marking —— Inspection ——
Packaging —— Finished products.
Hot dip galvanizing machinery supplier
The pipe machine is used to produce corrosion resistance and smooth
layer on the surface of raw pipes after cleaning.
hot galvanizing pipe mill is used to produce corrosion resistance
and smooth layer on the surface of raw pipes after cleaning.
This system allow manual control interface in the pickling effect
unqualified when artificial intervention, and real-time data
recording, the formation of large data, the future through big data
analysis, according to the acid concentration and temperature, the
shape parameters, automatic formation of reasonable pickling
process.
1. track is shared with an enclosed single beam, with a distance of
about 32 meters.
2. configuration holder 2 sets, single set of hand load 10T,
running speed of 10-20m/min;
3. supporting hand is equipped with vehicle control PLC, frequency
converter, wireless communication module, code reader, track
locator, RFID recognition system and so on to control the original
device, and the protection level of electric control box is IP65.
4. system uses the sliding contact line, the collector supply of
the car power supply; all units and the main control system adopts
industrial control between wireless Ethernet, implementation of
vehicle PLC and ground PLC master data exchange.
we look forward to working with you in the future
If any items interest you, please contact us.
Meanwhile, please tell us the following information.
(1) Materials to be galvanized
(2) Dimensions
(3) Maximum weight
(4)Maximum capacity per hour
(5)Annual capacity
(6) Power source
(7) Fuel
