New ISO9001 Zinc Dross Recycling , OEM Zinc Dross Recycling
1) We have 18 years experience in exporting casting parts such as
ingot molds,sow molds,slag pans,dross pans,skim pots,slag pots &
anode yokes for Aluminum Remelters & Casthouses . Most of our end
users(Such as Alcoa) are from Canada,Australia,USA,Germanny &
England.
2) Customer Designed & Standard,such as
LP1200,LP1500,LP1650,LP2000,LP2300,LP3200,LP4500(Sow Mould)
Two-Claw/Pin,Three-Claw/Pin ,Four-Claw/Pin,Six-Claw/Pin,Eight-Claw(Anode Yoke)
3) Casting Process:Sand casting, V-process casting, Lost foam casting
Remove slag machine
In the process of hot dip galvanizing production, due to the heavy
zinc iron reaction will produce a large number of zinc slag in zinc
pot, using it to clean up in time in dregs can improve the quality
of galvanized artifacts, reduce the production cost, improve the
service life of zinc pot and reduce energy consumption.
Amount:1 set
Size: H3.8m-1T
Features of the Zinc Dross Recycling machine:
1. No need for any fuel in the whole process
2. To reduce the dirt, smog pollution problem with dirt and smoke
ventilation equipment.
3. Automatic mechanical operation, no harmful to the operator’s
health.
4. High efficiency for recycling rate (90% of aluminum from the
ashes), short working time (10- 12 minutes can process
100kgs-500kgs aluminum and ashes),
Feel free to contact us if you are interested in our products or
want to know more about us!
Thank you!
