1.Our marine pneumatic fender as a protective medium is suitbale
for ship to ship contact, ship to dock and ship to berthing.
2.It is light weight,portable and floatable, can be installed,
replaced easily and reused 6-8years without misuse.
3.We have provided pneumatic fenders to marine service and offshore
service for varieties ships.
4.Low reaction force and high energy absorption fenders with CCS,BV
certificate.
Classification of marine pneumatic fender
Marine pneumatic fender types:
1.Net-type fender: fenders which are covered by a tire chain net,
each end shall be linked together with one to two ring(s).
2.Sling-type fender: fenders which are designed to be used without
a protection net.
Test of 3.3*6.5m Yokohama Marine Fenders For Dock Berthing
1. Material test for rubber
The material test of the outer rubber and the inner rubber shall be
conducted in accordance with the physical properties of inner and
outer rubber required by ISO 17357:2002
2.Dimensional inspection
The dimension of all the fenders shall be inspected at the initial
internal pressure and the results shall be within the following
tolerances:
- length: +10%, -5%;
-diameter: +10%,-5%
3.Air-leakage test
The air-leakage test shall be conducted on all the fenders at
initial pressure for more than 30 min, and the test results shall
confirm that there is no air leakage.
4.Hydrostatic-pressure test
The hydrostatic-pressure test shall be performed for 10 min at the
hydrostatic-pressure shown in "test pressure at 0% deflection".
Maximum temporary elongation: 10%
Qingdao Florescence Marine Supply Co.,Ltd is a comprehensive marine
supply enterprise, intergrating the scientific research design,
product development with technical services. We specialize in
manufacturing pneumatic rubber fenders, foam fenders, various
marine rubber fenders and ship lauching & salvage rubber airbags.
FLORESCENCE products are designed, manufactured, and tested per
ISO17357 and ISO9001:2002. And every unit is producted strictly
according to the requirements of ship surveyors such as BV, CCS,
etc.
Located in the Port of Qingdao FLORESCENCE can respond effectively
to any urgent requirements of fenders and airbags with its
comprehensive range of products.
Florescence has our own factory which manufacture rubber products
for around 20 years, so we are the factory direct seller, we are
more professional than other companies. FLORESCENCE Ship Salvage
Fenders are exported to lots of countries, including Indonesia,
Singapore, Kenya, Tanzania, etc. FlorescenceRuber Fender can be
manufatured in various sizes and types according to the clients'
requirements.
