Ship Marine Floating Pneumatic Fender for Sale
----With CCS Certificate
| Product name | Pneumatic fender |
| Material | Natural rubber |
| Size | Diameter:0.5-4.5m Effective length: 0.6-12m |
| Application | STS / STD |
| Certificate | CCS/BV |
| Warranty period | 24 months |
| Lifetime | 10 years(under normal using) |
Tests of Pneumatic Fender
1. Material test for rubber
The material test of the outer rubber and the inner rubber shall be
conducted in accordance with the physical properties of inner and
outer rubber required by ISO 17357:2002
2.Dimensional inspection
The dimension of all the fenders shall be inspected at the initial
internal pressure and the results shall be within the following
tolerances:
- length: +10%, -5%;
-diameter: +10%,-5%
3.Air-leakage test
The air-leakage test shall be conducted on all the fenders at
initial pressure for more than 30 min, and the test results shall
confirm that there is no air leakage.
4.Hydrostatic-pressure test
The hydrostatic-pressure test shall be performed for 10 min at the
hydrostatic-pressure shown in “test pressure at 0% deflection”.
Maximum temporary elongation: 10%
Classification of Pneumatic Fender
1. Fender types:
1.Net-type fender: fenders which are covered by tire chain net,
each end shall be linked together with one to two ring(s).
2.Sling-type fender: fenders which are designed to be used without
a protection net.
2. Initial internal pressure:
1.Pneumatic fender 50 (initial internal pressure 50 KPa)
2.Pneumatic fender 80 (initial internal pressure 80 KPa)
Advantages of Pneumatic Fender
1. High energy absorption and low reaction force
2. Light weight, portable
3. Install easily
4. Long service life
5. Supplied with chain and tire net
6. Various Sizes
7. Suitable for locations with large and small tidal differences
Pneumatic Fender
Pneumatic Fender has been used for almost 50 years, it's also
called marine rubber fender or YOKOHAMA fenders. It is the mian
anticollision device for ship application in the world. Pneumatic
Fender is used as a protective medium for ship to ship contact,
ship to quay,and ship-to-berthing. Pneumatic fenders are a kind of
marine equipments that are used to protect boats, ships and other
naval vessels from colliding against each other or against docks,
wharves and piers. In other words ship fenders can be simply termed
as a marine bumper.
Why Choose Florescence
Florescence is a trusted supplier for shipyard, quay, harbors in
the global market. Our factory in Shandong Province has been
established for over 20 years. FLORESCENCE Pneumatic Fenders are
sent to lots of countries, including Indonesia, Singapore, America,
Russia, etc. Pneumatic fenders are certificated by CCS, ISO, ABS,
BV, etc. It can be manufactured in different kinds of sizes and
types according to the customers' requirements.
1. Outer Rubber Layer
Rubber layer which covers the outside of the fender to protect the
cord layers and the inner liner rubber from abrasion and other
external forces.
2.Tyre-cord Layers
Tyre-cord layers are made of synthetic-tyre-cord fabric which
maintains the internal air pressure of the fender.
3. Inner Rubber Layer
The inner rubber layers are used to keep the air inside, avoid air
leakage, it's the key to fenders' airtightness.
4. Flange
Applications of Pneumatic Fender
1. Ship to ship,ship to wharf,
2. Oil tankers, container vessels
3. Luxury yachts, ocean platforms
4. Larges shipyards
5. Fender system
6. Military ports ,warship
7. Larger under water foundations of bridge
Pre-Sales Service
* Professional introduction
* Third party inspect support
* View our Factory.
After-Sales Service
* On-site instruction
* Engineers available to service machinery overseas.
