Product Description
Product name: | pneumatic rubber fender |
Diameter: | 0.3-4.5m |
Length: | 0.6-9m |
Length: | 50kpa,80kpa |
HS code: | 40169400 |
OEM: | accepted |
The pneumatic rubber fender is also called Yokohama fender. It
consists of 3 different layers: the outer rubber layer, the
synthetic-cord layer for reinforcement and the inner rubber layer.
With the feature of the soft reaction force, lower mooring forces
in rough weather conditions, simple and low installation and
maintenance cost. The pneumatic rubber fender is widely used
in the ship to ship and ship to dock operations in the marine
industry.
Net type pneumatic fenders are fitted with a chain-tyre net. The
chain-tyre net consists of used tires that are connected by a
network of horizontal and vertical chains, which adds further
protection to the fender body.
Feature & Advantages:
1. ISO17357 Approved
2.Hot dipped galvanized chain net &Used truck tires
3. Low transportation cost, deflated and folded transportation,
thus the transportation was much saved.
4. Fast delivery, common size 0.5x1,1x1.5,1x2,1.5x3,2x3.5 are
available in stock for immediately dispatch.
5.Other sizes besides the above also can be customized.
6.Can be delivered in various sizes with chain-truck/aircraft tyre
net.
Pneumatic rubber Fenders made by an outer rubber, reinforcement
synthetic-tyre-cord layer, and inner rubber, then shaping curing.
1.The outer rubbers are used to protect the cord layers and inner
rubber from abrasion and other external forces. This rubber
compound have sufficient tensile and tear resistance strength to
withstand anticipated weather conditions and severe usage.
2.The reinforcement synthetic-tyre-cord layer strong enough to
maintain the internal air pressure of the fender.
3.The inner rubber layer seals the pressurized air inside the
fender.
Application
Pneumatic rubber fenders have been in use for around 50 years.It is
the leading anti-collision device for marine application in the
world.This composed air filled rubber fenders is used as a
protective medium for ship-to-ship(STS),ship to quay(STQ) and
ship-to-berthing(STB).
About us
Qingdao Florescence Marine Supply Co., Ltd is a comprehensive
marine supply enterprise, integrating the scientific research
design, product development with technical services since 1992.We
specialize in manufacturing pneumatic rubber fenders, foam
fenders,various marine rubber fenders and ship rubber
airbags.Florescence fenders are designed, manufactured, and tested
per ISO 17357 and ISO 9001:2000 requirements. And every unit
robustly built to the stringent requirements of ship surveyors such
as BV,CCS, etc. Equipped with advanced manufacture, test and
R&D equipment, Florescence becomes a Chinese leading marine
supplier with the longest history, fastest development, most
abundant capital and technology and the most competitive
products. Located in the Port of Qingdao, Florescence can respond
effectively to any urgent requirements of fenders and airbags
with its comprehensive range of products.With 25 years experiences,
our high quality products sell well worldwide,while delivering the
highest levels of customer service and product reliability in the
industry. Our highly trained staff are able to travel to your site
to undertake repair or refurbishment work on pneumatic or foam
filled fenders.Qingdao Florescence Marine Supply Co., Ltd is fully
committed to promoting our customers development and exceeding our
customers expectations in services quality. All the Florescence
staff work carefully and treat people honestly. We expect to
cooperate with more customers worldwide and create a better future
together.
