Auditorium Interior Decorated Wooden Sound Proofing Folding Movable
Partition Walls
Installation:
1.PREPARING
1)Constructing location: keep dry, the temperature should be higher
than 10'C, the widest humidity range should confined to 40%-60%
after construction 24 hours before constructing, the location
should reach the standards as above.
2)Acoustic panels: for the acoustic panels accommodated to the
circumstance of constructing, please place the panels in the
constructing location for 48 hours, check up the type,
specification and amount of the panels before constructing.
3)Keels: fix the keels on the wall flatly according to the plan,
the keels should be flat, slick, no rust, no metamorphosis; thewall
must be construct according to the standards, the keels suitable
install with acoustic panels, leave smaller than 500mm space
between each wooden keel(smaller than 600mm of light steel keel),
install the keels vertically with acoustic panels.
2.FIXING
1)Siz of wall: all panels should be installed in accordance with
the manufacturers recommendations.
2)Cutting: all necessary hardware and accessories for a complete
job installation are to be furnished by the contractor.
3)Install the acoustic panels: the installation of acoustic panels
should be carried out in a sequence from the left to the right,
from upside to downside, the panels are cut to fit on site,
traditional woodworking tools are suitable for cutting the panels,
if
panels are cut using a fine tooth table saw the panels should be
cut face up to avoid scratching and at a much slower speed to
avoid any tearout or chipping.
4)Fix on keel:
1)Wooden keel fixing using nails, staples or screws into prefixed
timber battens on the walls via the tongue and groove joint.
2)Also can fixing by: Light Steel Keel(size: 18*26*3000mm, use
clip(size: 45*38mm) to fix.(needs 2.1m of keel and 17 clips per m2)
The section configuration of special wooden acoustic panel: substrate, felt and surface.
1)Substrate(basal material): based on high quality of 12/15/18mm
MDF with density of 750kg/m3, more choices for basal material:HDF,
E1 ECO-friendly MDF and Fireproof MDF(B1 grade).
2)Feld: acoustic fleece, pasted on the back of the panel, noise
reducible and fire resistant(made in CHINA, GERMANY AND FRANCE)
3)Surface: available in three different finishes: real wood veneer,
printed wood melamine finished and fireproofing surface.
| 1.Hanging on ceiling | The floor without a track, just put the rail mounted on the ceiling |
| 2.Excellent Quality | Each pieces of partition can turn around 360 degree. |
| 3.Stable and secure | After partition is stable and reliable, and is not easy to swing |
| 4.Energy efficient | The large space divided into a small space, in order to reduce air
conditioning power consumption; |
| 5.Heatproof&fireproof | Good heat insulation performance,Adopt effective fire prevention
materials |
| 6.Elegant appearance | Surface any adornment, can unite with indoor adornment effect |
| 7.Easy to collect | Can be hidden in the special coffer, does not affect the overall
appearance |
| 8.Various applications | Hotels,exhubition halls,restaurants,multi-functional rooms etc. |
Suitable used in:
1.studios, recording rooms, listening rooms, rehearsal rooms and
more professinally interspace timbre projects.
2.theaters, indoor gymnasiums, discos, KTV rooms and more
performance and entertainment location.
3.meeting rooms, offices, halls, hotels and more sound absorption
and secrecy projects.
4.air-port, railways, bus-stops, manufactories, workshops and more
noise reduction projects.
