Wooden Surface Movable Office Operable Folding Partition Walls with
Sliding Doors
Product details:
(1)Size of wall: all the folding partition wall panels should be
installed in accordance with the manufacturers recommendations.
(2)Cutting: all necessary hardware and accessories for a complete
job installation are to be furnished by the contractor.
(3)Install the acoustic panels: the installation of acoustic panels
should be carried out in a sequence from the left to the right,
from upside to downside, the panels are cut to fit on site,
traditional woodworking tools are suitable for cutting the panels,
if panels are cut using a fine tooth table saw the panels should be
cut face up to avoid scratching and at a much slower speed to avoid
any tearout or chipping.
(4)Fix on keel:
Wooden keel fixing using nails, staples or screws into prefixed
timber battens on the walls via the tongue and groove joint.It also
can fixing by: light steel keel.
Specification:
No floor rails: Top hung system without the need for a floor track
Stable and safe: Stable and reliable after the partition, easy to
swing
Sound insulation: Sound insulation effect, the maximum sound
insulation up to 570B, we can offer various levels of sound
reduction
Insulation energy saving: Excellent insulation performance,
according to different seating rate, the large space is divided
into small space to reduce air conditioning power consumption
Efficient fire: The use of highly efficient fire prevention
materials, fire performance is good
Retractable and flexible: Retractable top and bottom seals ensure
effortless movement of panels, numerous panel stacking options for
complete flexibility,only a person can complete the whole process
of cutting off.
The Special Point Processing on Folding Partition Walls System
1. Horizontal Seals
The principle of double skin construction on movable and operable
partition system is applied consistently in the seal area in order
to ensure maximum sound insulation. A spindle mechanism presses
extendable, spring loaded, double seals against the floor and the
ceiling track. Any irregularities in the flooring are offset by
spring-loaded double chamber seals. The contact force of the
sealing strips does not place excessive strain on screed floors,
but does ensure that the flexible system is sufficiently stable to
prevent the panels moving, even in the event of an attempted forced
entry.
2. Corner Seals
Flexible resolves the technical issue of corner seals with
specially designed, corner pieces that also reinforce the stability
and done insulation properties of movable and operable partition
system.
3. Magnetic Strip
The individual panels are centered via the magnetic strips to
guarantee sound positive locking and sealing.
4. Operating Handle
In manual systems, the element sealing strips are operated using a
crank. The crank has as a captive bayonet fitting to prevent it
from being pulled off. The bayonet arrangement is easy to disengage
and prevents crank slip page on movable and operable partition
system.
5. Frames
The frame is made by torsion hollow-chamber aluminum alloy and
sectional by steel tubing. Therefore, Transverse forces will not
cause any deformation for the frame. Combined with the panel
mounted in acoustically free suspension, flexible elements are able
to offer both exceptional strength and outstanding sound insulation
for movable and operable partition system.
6. Roller Assemblies
The dampening track roller assemblies prevent the transmission of
impact forces and operating noise, to protect the element, rail and
carrier on movable and operable partition system.
Application
Our products (Movable Folding Partition Walls) are widely used in
the hotel banquet halls , meeting rooms , exhibition halls ,
conference rooms , International Convention Centers , KTVs ,
upscale restaurants , office buildings , schools , hospitals and
others .
