Temperature Fast Change Large Capacity Battery Pack Salt Spray
Corrosion Test Room
Product description:
Battery pack salt spray corrosion test room according to the latest
national standard GB / T 31467.3-2015 "lithium-ion battery pack for
electric vehicles and systems - Part 3: Safety requirements and
test methods" requirements test battery pack or system housing
placed in a certain concentration A certain period of time, its
corrosion resistance. Battery pack salt spray corrosion test room
can also be used for a variety of materials, the surface of the
plating, anodizing, spraying, rust-proof oil and other corrosion
treatment, the corrosion resistance of their products. Assessment
of results: No leaks in the battery pack or system. Case cracked.
Fire or explosion.
Specification:
Temperature resolution: 0 1 ℃
Temperature deviation: ± 1 ℃
Temperature uniformity: ≦ 2 ℃
Temperature fluctuation: ± 0.5 ℃
Temperature overshoot: ≤ 3 ℃
Laboratory temperature: RT ~ 50 ℃
Pressure barrel temperature: RT ~ 63 ℃
Relative humidity ≥ 85% R.H
Test sample size: 2000 × 1500 × 1600 W × H × D (mm) or customized
according to the actual size of the battery pack
Test sample weight: not less than 600kg or customized according to
the actual weight of the battery pack
Spray settlement (m1 / 80cm2.h): 1.0 ~ 2.0 (collected for at least
16 hours, whichever is the average)
Spray pressure: 1.00 ± 0.01 kgf / cm2
PH value PH: neutral 6.5 ~ 7.2 Acid 3.0 ~ 3.3
Spraying, still time: 1min ~ 9999H fixed value operation can be
arbitrarily set, the program run time can be set loop operation
Maximum power: 15kW
Battery pack salt spray corrosion chamber equipment conditions of
use
Ring temperature: -5 ℃ ~ +35 ℃
Humidity: 40% ~ 80%
Noise: ≤70dB;
No strong vibration around
No direct sunlight or other heat directly irradiated;
Input Power: Three-phase five-wire system, AC380V ± 10%, 50HZ;
Plant height: the lowest point of the plant not less than 3.5m.
