L2 Managed 8-Port 1G/10G Base-T + 2-Port 10G SFP+ Gigabit Ethernet
Switch
Model: LNK-M8G2F Series
Overview
E-link LNK-M8G2F L2 Managed 8+2+1+1 10Gigabit Data Center Switch is
a standard 2-layer non-blocking switch. Providing 200Gbps switching
capacity, the highest performance (1U TOR) in the industry, with
148.8Mpps forwarding performance, L2/L3 full wire-speed forwarding.
With the modular design, it provides 8 1G/10G RJ45 ports, 2 10G
SFP+ optical ports, 1 Console port, 1 OOB management port, which
offers enough bandwidth for data aggregation and data exchange.
In order to flexibly respond to the network requirements, users can
select appropriate 10G ports according to their needs, ensure the
stability of the network and the balance of the load link. With
high bandwidth and low latency, pipe network. 8+2+1+1 switches
located in density of the next generation of data center and cloud
computing network access, can also be used for large Internet
cafes, the core of enterprise network, metropolitan area network,
or gathering.
Features
High density 10G access, performance is remarkable
(1)with 200Gbps backplane capacity, the industry the highest performance (1U TOR);
(2)hardware routing, the packet forwarding rate of the wire speed
layer 3 switching has reached 148.8Mpps, L2 / L3 full speed forwarding;
(3)8 1G/10G RJ45 ports, 2 10G SFP+ optical ports, the highest
density (1U TOR), meet the demand of high-density 10G server
access.
Wind direction flexible choice, green and energy saving
Innovative energy-saving technology: using the latest energy-saving
chip, fan speed control scheme of intelligent, supports real-time
detection power consumption, reduce operational cost for the
customer, create green data center.
Convenient in operation and maintenance
(1)Management support with Web, SNMP and Telnet;
(2)Support XModem protocol, use TFTP/ZMODEM to software upgrading
and BootRom upgrading;
(3)support SFP+, also backwards compatible XFP;
(4)Support 10G Base-T, be compatible with 1000M/100M Base-T. Max
forwarding distance can reach 100M with Cat6.
Technical Indexes
| Product Model | LNK-M8G2F |
| Fixed port | 8 1G/10G RJ45 ports + 2 10G SFP+ optical ports |
| Console port | 1 |
| OOB management port | 1 |
| Chip | BCM |
| Backplane bandwidth | 200Gbps |
| Packet forwarding rate | 148.8Mpps |
| Jumbo frames | 1522 bytes |
| Transfer mode | Support store-forward mode and cut-through mode |
| MAC address table | 16K |
| Packet Buffer | 2MB |
| VLAN ID | 4K |
| Flash Memory Capacity | 16MB |
| The Memory Capacity | 512MB DDR3 SDRAM |
| CPU | 600 MHz ARM Cortex-A9 single-core processor |
| Security Feature | IP+MAC+PORT+VLAN binding ARP inspection + DOS prevention + Port protection IP source port protection |
| VLAN | Port based VLAN 802.1Q VLAN Based IP Based MAC |
| MAC address table | Static MAC address table Dynamic MAC address table |
| Storm Control | Broadcast suppression Multicast suppression DLF suppression Limiting rate |
| Traffic Control | Half-duplex control based on the back pressure type Full-duplex control based on the PAUSE frame |
| Port Mirror | Support port mirroring |
| Port Management | General setting Port counting Configuring port Port trunking Port-isolation |
| QoS | IEEE 802.1Q Congestion mechanism Each port has 8 transmitting queues mapping 802.1p 8 priority |
| IP services | Ping detection DHCP Snooping |
| Spanning Tree Protocol | MSTP(802.1s), STP, RSTP |
| Multicast Management | IGMP Snooping frame |
| System Management | SNMP v1/v2 Support Console Support TELNET Support WEB |
| Remote Upgrade | Support version upgrading via web Support version upgrading via
local |
| Physical Characteristics |
| Dimension | 438.48mm*284mm*43.4mm |
| Power Supply Features | AC:90V～290V 50~60HZ |
| Power | ≤100W |
| Indicator Light | Power indicator, system, connection/sending and receiving
instructions |
| Environment temperature/humidity | Operating temperature:0°C～50°C(0m～1800m) Storage temperature:-40°C～+70°C Relative humidity:5%RH～95%RH,Non-condensing |
Application
