0.6/1kV Single Core Fire Resistant Power Cable 1.5 sqmm ~ 800 sqmm
IEC 60331
Construction: Cu/Mica/XLPE/LSZH/SWA/LSZH
(1) Conductor: Plain annealed copper (class 2, normal
stranded or compact stranded)
(2) Fire barrier: Mica tape
(3) Insulation: XLPE
(4) Filler, binder and inner covering: PP, PET, LSZH
(5) Armour: Steel wire
(6) Outer sheath: LSZH
PVC Insulated Cable is used as power distribution and transmission
line at rated voltage 0.6/1KV.
Used outside as energy utility and lighting cables, in cable ducts,
under ground, under normal and salty water if specially made.
Specifications
1.electric wire and cable
2.Over 20years professional experience
3.reliable repution&famous brand RMJT
1). Rated voltage U0/U 300/500V and 450/750V.
2). The long-time permissible temperature of cable: BV-105 below
105°C,and the other below 70°C.
3). Conductor maximum short circuit(not more than 5
seconds)temperature shall not be higher than 160°c.
4). The power cable is not limited by drop in level when being
laid, and the ambient temperature shall not be lower than 0°c.
5). The bend radius: the external diameter of cable <25mm, and
the bend radius is above 4 times of the external diameter of
cable. And the other is above 6 times of the external diameter of
cable.
6). Perfect chemical stability, resistant against acids, alkalis,
grease and organic solvents, and flame.
7). Light weight, perfect bending properties, installed and
maintained easily and conveniently.
8). Insulation sheath material and color: PVC in red, black, blue
or any color as required.
9). Type: Single or twin cables with different colors Provides OEM
according to requests of customer.
Standards: BS 7846; IEC 60331; BS 6387
Construction: Cu/Mica/XLPE/LSZH/SWA/LSZH
(1) Conductor: Plain annealed copper (class 2, normal
stranded or compact stranded)
(2) Fire barrier: Mica tape
(3) Insulation: XLPE
(4) Filler, binder and inner covering: PP, PET, LSZH
(5) Armour: Steel wire
(6) Outer sheath: LSZH
Cable identification
- Cores: Red, yellow, blue, black, green/yellow (by color tape,
except green-yellow core)
- Outer sheath: orange or as order
Characteristics
- Voltage rate: 0.6/1kV
- Maximum conductor temperature: 900C in normal operation; 2500C in
short-circuit for 5s max.
- Minimum bend radius: 12xD (twelve times overall diamerter of
cable)
- Fire resistant: IEC 60331; BS 6387
- Flame retardant: BS EN 60332-1; IEC 60332-1
- Corrosive and acid gas: BS 7846; BS 50267-2-1; IEC 60754-1&2
Smoke emission: BS 7846; BS EN 50268-2; IEC 61034-2
Notes: * All conductor in accordance with IEC 60228. Compacted
conductor (C.C) or non-compacted depend on order.
• Besides the above mentioned list we can also provide other sizes
depending on customer’s requirement.
Installation
1. The installation temperature should not over 20℃, If the ambient
temperature is lower than 0℃, the cable should be preheated.
2. The bending radius of cable should not less than 8 times.
3. After installantion, the cable should with stand voltage test
for 15min. 3.5kv D.C.
Technical parameter:
Temperature range in motion -5°C till +70°C
fixed -20°C till +70°C
Operating temperature short circuit °C 250
Short circuit time max. [sec] 5
Bending radius min. x diameter 15
Flammability standard EN 60332-1-2
