30dBm High Power GSM Mobile Signal Repeater Line Amplifier With LED
Panel
Descriptions:
Line Amplifiers are specially designed to assist the Base Station
(BTS) or Repeaters to compensate the
system loss from in-building distributing cable, power splitter and
directional coupler and extend in-building
signal coverage, and improve flexible of in-building signal
coverage system design
To meet the field strength requirements of in-building signal
coverage system.
Please keep away from heating-equipment, because the booster will
dissipate heat when working. And do
not cover booster with anything that influences heat-dissipation.
Features:
1. Cost effective solution for weak signal zones, reduce drop/off
calls.
2. Compact size, low power consumption,
3. easy installation, great cover.
4. Expansion and extending of the signal of base station.
5. Optimization of the quality of the signal and source
6. Wide band signal booster, or customize selective band booster.
7. High linear design, ALC function design, low interference to
BTS.
8. Support any cellular devices (voice & data & video)
Advantages:
Digital Display Panel, Intelligent mode setting
Smart function called which can be activated via the digital
display panel.
Users can choose gain and working system by LED Digital Panel.
Set the technical parameters simple and efficient, this is easier
than DIP Switch.
Specifications:
| Frequency Range | Uplink | Downlink |
| GSM900 | 890 - 915MHz | 935 - 960MHz |
| Max. Gain | 35dB | 40dB |
| Max. Output Power | 0dBm | 30dBm |
| Band width | Wide Band |
| Manual Gain Control | 31dB / 1dB Step |
| Automatic Gain Control | >30dB |
| Ripple in Band | ≤8dB |
| Noise Figure | ≤ 6dB |
| VSWR | ≤ 2.0 |
| Intermodulation Products | 9KHz~1GHz | ≤ -36dBm |
| 1~12.75GHz | ≤ -30dBm |
| Spurious Emission | 9KHz~1GHz | ≤ -36dBm |
| 1~12.75GHz | ≤ -30dBm |
| Time Delay | ≤ 1.5 μs |
| Frequency stability | ≤ 0.01ppm |
| MTBF | > 50000 hours |
| Impedance | 50 ohm |
| Power Supply | AC 90-264V,DC 9V/5A |
| Power LED | Power indicator |
| Alarm LED | Red | Self oscillation or Strong input signal |
| Green | Normal |
| Mechanical Specification |
| RF Connector | N-Female |
| Switch | Power Switch |
| Cooling | Heatsink Convection cooling |
| Humidity | < 90% |
| Operating Temperature | -20°C ~ +55°C |
| Environment Conditions | IP40 |
| Installation Type | Wall Installation |
| Size | 268mm*58mm*189mm |
| Weight | < 3.5Kg |
Standard Package:
1) AC90-264V, DC9V/5A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS
