23dBm Wireless Indoor Mobile Phone Signal Booster CDMA 800 Mhz For
Home
Descriptions:
The CDMA Cell Phone Signal Booster Kit is the best kit for boosting
cell signal in your Home Or Office.
Eliminate dropped calls and increase data speeds with a signal
booster.
Indoor Cell Phone Signal Booster series is an ideal solution for
wireless system in small/medium
businesses and home users looking to enhance indoor wireless
connectivity. It is connected via coaxial
cable to Donor Antenna and Service Antenna, Donor Antenna is placed
outside the building where it has
easy access to BTS signal, and the Service Antenna is placed in the
building where it can extend radio
coverage to the blind area. And Automatic Gain Control (AGC) to
avoid the Booster from over saturation,
therefore maintaining a high voice quality and avoid adding
interference to network. With good looking &
super compact design also make it attractive. Besides, it is easy
installation feature is also for individual
customers to install the booster by themselves, and it does not
need much professional knowledge and
instrument.
Features:
Cost effective solution for weak signal zones, reduce drop/off
calls.
Compact size, low power consumption,
easy installation, great cover.
Expansion and extending of the signal of base station.
Optimization of the quality of the signal and source
Cover about 500~3000m² without block or obstruct.
High linear design, ALC function design, low interference to BTS.
Support any cellular devices (voice & data & video)
Wide band signal booster, or customize selective band booster.
Can customize other system CDMA450, LTE700, LTE800, iDEN,
CDMA800/GSM850,
GSM900, EGSM, AWS1700, DCS1800, PCS1900,WCDMA, LTE2600,etc
Manual gain control (MGC 31dB range) available for both uplink and
downlink to adjust the gain value for proper coverage during
installation or maintenance.
Advantages:
can customize the Cover Image on the Cell Phone Signal Booster,
design private styles
If there are strong input signal or severe self oscillation, ISO
LED is red.
If there are good input signal, AGC LED is green.
Specification:
| Frequency Range | Uplink | Downlink |
| CDMA800 | 824- 849MHz | 869-894MHz |
| Max. Gain | 65dB | 75dB |
| Max. Output Power | 17dBm | 23dBm |
| Band width | Wide Band |
| Manual Gain Control | 31dB / 1dB Step |
| Automatic Gain Control | >30dB |
| Ripple in Band | CDMA,GSM≤6dB; DCS,PCS≤8dB； |
| Noise Figure | ≤ 6dB |
| VSWR | ≤ 2.0 |
| Intermodulation Products | 9KHz~1GHz | ≤ -36dBm |
| 1~12.75GHz | ≤ -30dBm |
| Spurious Emission | 9KHz~1GHz | ≤ -36dBm |
| 1~12.75GHz | ≤ -30dBm |
| Time Delay | ≤ 1.5 μs |
| Frequency stability | ≤ 0.01ppm |
| MTBF | > 50000 hours |
| Impedance | 50 ohm |
| Power Supply | AC 90-264V,DC 9V/3A |
| Power LED | Power indicator |
| ISO(Alarm LED) | Red | Self oscillation or Strong input signal |
| Green | Normal |
| Mechanical Specification |
| RF Connector | N-Female |
| Switch | Power Switch |
| Cooling | Heatsink Convection cooling |
| Humidity | < 90% |
| Operating Temperature | -20°C ~ +55°C |
| Environment Conditions | IP40 |
| Installation Type | Wall Installation |
| Size | 204mm×128mm×27mm |
| Weight | < 1.5Kg |
Standard Package:
AC90-264V, DC5V/3A power supply adapter 1PCS
AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
Installation kit 1PCS
User manual 1PCS
Recommended Accessories:
Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
5D-FB coaxial cable with connecter (Cable length optional)
Application:
To expand signal coverage or fill signal blind area where signal is
weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking
Lots, Shop.etc.
