Alloy Structure Steel Round Bar SAE8620 /1.6523/20CrNiMO

Alloy Structure Steel Round Bar SAE8620 /1.6523/20CrNiMO

Grade:

America Standard: SAE8620
International Standard: 20CrNiMo2
Japan Standard: SNCM220
Europe Standard: 20NiCrMo2-2 1.6523

Chemical Composition

Available sizes:

Dia: Hot rolled:10-310mm; Gorged:80-800mm
Length: 3-12m as customer's request

Delivery condition:

Hot rolled or forged, Peeled(bright surface), annealed or QT(Optional)

Heat Treatment:

Soft annealing: heat to 680-720°C, cool slowly.
Hardness after annealing: Max. 241 HB
Hardening: 820 - 850 °C
Normalizing temperature: 840-880°C
Tempering: 540-680°C

Usage:

1. SAE8620 round steel high hardenability

2. No temper brittleness, weldability is very good

3. The formation of cold cracking tendency is small

4. Machinability and cold strain plasticity good

5. General quenching or carburizing quenching state use.

Features:

Hardenability similar to 20CrNi steel.

Although the content of Ni in steel is half that of 20CrNi steel, the upper part of the austenite isothermal transformation curve is shifted to the right due to the addition of a small amount of Mo. Due to the proper increase of Mn content, the hardenability of the steel is still good, and the strength Also higher than 20CrNi steel. Commonly used in the manufacture of small and medium-sized cars, tractors, engines and transmission gear in the system can also replace the 12CrNi3 steel mandrel performance requirements of high carburizing parts, cyanide pieces, such as oil drilling and metallurgical open-pit mine roller bit Tooth claw and toothed body.

20CrNiMo due to containing molybdenum in addition to a good overall performance but also resistant to a certain temperature. For manufacturing steam turbine gear rotors internal combustion engine connecting rod cross section forgings.

Heat treatment:

Quenching heating temperature (℃): 850; Coolant: oil
Tempering heating temperature (℃): 200; coolant: empty
Tensile strength σb (MPa): ≥ 980 (100)
Yield strength σs (MPa): ≥785 (80)
Elongation δ5 (%): ≥9
Section shrinkage ψ (%): ≥ 40
Impact energy Akv (J): ≥47
Impact toughness value αkv (J / cm2): ≥59 (6) Brinell hardness (HBS100 / 3000) (annealing or tempering state): ≤ 197

Delivery Status:

To heat treatment (normalizing, annealing or tempering) or non-heat treatment delivery, delivery status should be specified in the contract.

Our Advantages

• We are a stockist who have a lot of stocks all the time, we can arrange fast shipment
• All products 100% pass UT test before the shipment.
• The 3^rd party inspection is accept.
• Low MOQ request
• TT, LC payment are both accepted
• High quality, you won’t have any quality problems

Guangzhou ChangFeng Steel Co., Ltd. is a professional special steel company, which specialized in exporting mould steel products based in China.With twenty years experience in special steel industry, our main products are Plastic Mould Steel, Hot Work Mould Steel, Cold Work Mould Steel, Alloy Structural Steel, Tool Steel, Stainless Steel, Carbon Steel and Forged Block.

To ensure provide high quality products to customers, we have close cooperation with many Chinese first class special steel enterprises, including Baosteel Group, Dongbei Special Steel, Changcheng Special Steel, Hongsheng Heavy Industry, Xingcheng Special Steel, Daye Special Steel. We have thousand tons of stock materials in our own factory and also can provide processing services to customers. We are full of export experience for many years, the product covers America, Germany, France, Italy, Turkey, Singapore, Thailand, Malaysia, Vietnam, Taiwan, and Middle-East.

After years of development, the company has established a complete quality management and export service system. We have a group of experienced and competent elites and is capable of offering the best service to clients. Our company equips with large-sized Vertical saw machines, Horizontal saw machines, Milling machines, Grinding machines and other advanced equipments to provide customers with cutting and other processing services. All the products should be inspected the metallographic analysis, hardness, ultrasonic flaw detection and other strict inspection processes, which meet the standards of DIN, AISI, JIS and GB to ensure their function and quality.

Our company keeps the principle of “sincerely cooperation, endless striving for perfection”. We desire to establish the long-term mutual beneficial and win-win relationship with clients all over the world.