28000lux Superbright LED Two Charging Way IP68 Miners Cap Lamp with
Warning Lights
1.Features for Miners Cap Lamp
1). Explosion-proof, water-proof, protection in electrical short
circuit,automatic power- off on the socket, 100,000 hours led
lifetime.
2). Light weight, portable,high quality, strong brightness, long
life time.
3). More than 16 hours working time, more than 1000 cycles lifetime
of the battery.
4).Brightness is up to 28000lux ! Weight is light for portable use.
5). All our lamps has one year warranty. We will keep free
maintenance for you in one year.
2.Specification of Miners Cap Lamp
| Item | Value |
| Model | GS12-A |
| Light source | 1pc 1.6W Cree led and 2pcs SMD leds |
|
| Battery capacity | 6.8Ah |
| Rated Voltage | 3.7V |
| Main light current | 450mA |
| Power of the main light | 3W |
| Illuminous | 348LUM |
| Brightness of the main light | 28000lux |
| Life span for main LED | 10000hours |
| Battery cycles | 1000 cycles |
| Working time | 16hours |
| Weight | 396g |
| Water-proof grade | IP68 |
| Certified | CE,ATEX,EXIB II M1 |
3. Switch of Miners Cap Lamp
The electric switch is waterproof, it works as follows:
The first press makes the auxiliary lights on
The second press makes the main light on
The third press makes the light off
- The LED cap lamp with two lighting modes. You can push on the
switch button on lamp head to change from the main lighting source
to subsidiary lighting source or to turn off the lamp.
- In the first time using lamps,pls use our special charger or
accepted charging rack to charging lamps firstly.when the lamps are
under charging,charger indicated light is RED COLOR,when the
charger indicated light turned GREEN COLOR,it mean that charger
have finished to charging.
- To use the cap lamp, you have to let the waistband to go through
the waistband ring on battery box and tie it well. Then clip the
lamp head on the cap, check the cable and turn the switch on.
4. Charging of Miners Cap Lamp
4.1.1 Traditional charging way
Connect the single charger to the power supply or switch on the
charger rack, the indicator light of the charger turns green.
Connect the cap lamp with the charger. Fix the brass pin
(cathode)of the charger into the hole of the cap lamp clip.
Rotate the head lamp 180 degree clockwise, make sure the anode
touch of the head lamp is closely connected to the connected metal
base (anode).Then the indicator light turns red, which means the
lamp is being charged.
When it’s charged by 2A single portable charger or the intelligent
chargers racks, the indicator light of the charger keeps flashing
from green to red, it meaning the battery has been charged at least
90%. The cap lamp can work more than 13h continuously if charging
is stopped at this moment. If the indicator light of the charger
flashes green only, then the battery has been fully charged.
Rotate the head lamp 180 degrees anti-clockwise; take it away from
the charger.
4.1.2 USB charging way
Connect the “5V,2A” power supply with magnetic USB wire to
“AC,100-240V”outlet.
Note: All kinds of USB standard charging interface equipment can be
used as a miners cap lamp charger.
Connect the magnetic charging terminal with the USB charging points
, make them contact tightly. The cap lamp’s indicator turns red,
which means it’s charging.
The cap lamp’s indicator turn green, which means it finishes
charging. Take away the USB wire from the cap lamp, and then use
the cap lamp.
5.Troubles and troubleshootings
| Trouble description | Trouble analysis | Troubleshooting |
Light is not on when pressing
the button | Battery power is used up or
Automatic opening protection | Charge the lamp |
Working time is less than
12 hours | Battery is not fully charged | Make sure the lamp well
connected to the charger
when charging |
| Longer charging time | The charging points poor contact | Clean the charging points
and the slot |
| Low illuminance | Dirty lens | Clean water wash lens |
6. Safety warning
The normal battery warning:
About 1 hour before the battery power is out, the main LED light of
GL12MS flashes softly(one time flashing for every five seconds) to
remind the user that the power is nearly used up and needs to be
recharged, If you don’t want the flashing to affect the normal
lighting, you can press the switch more than 2 seconds. The main
light source will flash two times, and the flash two times, and the
flashing is away. Then the cap lamp restores to normal working.
The least battery warning :
When the battery is only able to keep the cap lamp on for 10
minutes, its main light source will flash with the strong and soft
light quickly (one time flashing for every two seconds).This
information is to remind you that the battery is nearly used up and
it needs recharging or exchanging to the auxiliary light source.
a) Please donot shoot at eyes directly while the lamp is working
since the strong light will hurt eyes.
b) Please do not disassemble the cap lamp, otherwise it maybe cause
potential troubles related to safety, reliability to work
underground.
c) Please do not charge the lamp underground.
d) Please keep the lamp away from fire sources.
7.About us
GREEN LIGHTING ELECTRONICS CO.,LTDis an expertised manufacturer of
explosion-proof mining lamps which is located in ShenZhen area in
china.Our factory has skilled experience in underground working
lamps development and production. We focus on the development and
innovation, and we pay more attention to great quality. We also
have established our own marketing department for foreign sales.
8.Product Image of Miners Cap Lamp
