10W 2100MHz Cell Phone Signal Boosters , 3G WCDMA Repeater for Big Building

10W 2100MHz Cell Phone Signal Boosters , 3G WCDMA UMTS Repeater for Big Building

Signal Booster Description:

Mobile network carriers use various frequencies for transmitting data to our cell phones.

Greetwin has developed an exhaustive range of highly performant 3G 2100 Wide Band Repeaters that would accommodate your requirements towards the device in terms of operating frequencies for calls and Mobile Data as well as coverage.

3G 2100MHz Wide Band Repeaters are cost effective and reliable solutions designed to extend and improve the coverage area of 3G communication systems. GW-40W RF Repeater is designed to solve problems of 3G mobile signal, which is much cheaper than adding a new base station (BTS). Main operation of the repeaters are to receive lower-power signal from BTS via RF transmission and then transmit the amplified signal to the areas where network coverage is inadequate.And the mobile signal is also amplified and transmitted to the BTS via the opposite directon.

The Single-Band RF Repeater is the kind of repeater used most frequently. It has a simple structure to transparently convey and amplify the wireless signal (at the same frequency) between the BTS (Base Transceiver Station) and mobiles in single wireless network.

The Single-Band RF Repeater is working as a relay between the BTS and mobiles.

It picks up the signal from the BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Coverage Antenna (or the Indoor Signal Distribution System) to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.

As per operator’s requirement for working frequency, two types of Single-Band RFR are available:

1. Band-Selective Single-Band RF Repeater: to amplify all signals in the whole band (bandwidth is customized);

2. Channel-Selective Single-Band RF Repeater: to amplify only the signals transmitted in the customized 1/2/4/8/16 channels.

Signal Booster Features:

· Aluminum-alloy casing has high resistance to dust, water and corroding;

· AGC (automatic gain control) function to prevent self-oscillation;

· Highly selective channel selector can process multiple channels simultaneously;

· No interference to BTS by adopting linear amplifier with high gain and low noise;

· Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink;

Signal Booster Application:

To expand signal coverage or fill signal blind area where signal is weak or unavailable.

· Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, highways…

· Indoor: Hotels, exhibition centers, basements, shopping malls, offices, parking lots.

The Repeater is mainly applicable to such case:

· The repeater can find an installation place which can receive pure BTS signal at strong enough level and can meet the requirement of isolation to avoid self-oscillation;

In comparison with FSR (frequency shift repeater) and FOR (fiber optic repeater), the RFR has the following benefits and disadvantages:

Signal Booster Specification:

   Shenzhen Greetwin Technology Co., Limited is one of the leading suppliers which specializes in designing and manufacturing RF Jamming Equipment and Wireless Coverage Products.

   Wireless Coverage Products include 2G 3G 4G LTE 5G RF Repeater.

   The RF Repeater solutions will bring smooth and clear calls, support all bandwidths and mobile standards including TETRA, iDEN, LTE700, GSM850, EGSM, GSM900, DCS1800, PCS1900, CDMA800, CDMA450, LTE 4G, CDMA2000, 3G(WCDMA), LTE2600 and TDD-LTE series.
 

   Such as, Wide band Repeater, Band selective Repeater, Digital Repeater, High Power Outdoor Repeater, Fiber Optic Repeater, ICS Repeater, Consumer Signal Booster, Power Amplifier.

We are committed to providing the best solutions for mobile operators, offering OEM and ODM service. Products can be customized according to different operators in the world and the output power are available from 0.01W to 20W.

   RF Jamming Equipment include Cell Phone Signal Jammer, RF Communication Jammer(20-6000MHz) and 20-200W Power amplifier.

   GREETWIN is the foremost innovator in the field of RF jamming, offering a comprehensive range of jamming equipment and systems which have a proven record of reliability and performance in all types of applications and environmental conditions.

   In countering the ever-growing threat of remotely controlled improvised explosive devices (RCIEDs), we has invested heavily in the development of a range of multi-band, very-high-power jamming systems for the protection of troop transportation, military and police checkpoints, large governmental establishments, bomb disposal squads and VIP convoys.

   Such as, 5KM Drone jammer, UAV jammer, High power bomb jamming devices, Military IED jammers, Digital programable jammer, VIP Convoy Bomb Jammers (RCIED Jammers), Mobile Phone Signal Jammers, Prison Jammers, Portable Jammers, Handheld Jammers, to suit all types counter terrorism activities.

   Our clients are government agencies, military, SWAT team, prison, school, bank, law enforcement and VVIPs. We also serve corporations and private individuals who must take responsibility for protecting assets, proprietary information, executives and family members.

  GREETWIN products have been exported to more than 60 countries and regions around the world. Such as Southeast Asia, Africa, Europe, South America and the Middle East.

  Let us hand in hand and create a glorious cause!