Optical cable crush testing machine fiber optic cable crush tester
crush detector
Description
The equipment used to test optical cable under flattened
properties. By applying flattened force, for the qualified optical
cable, no fiber fracture, fiber attenuation values meet standard,
no optic cable jacket cracking the equipment adopts computer
control, servo motor drive, precision ball screw drive loading, and
precision load sensor signal measurement. With the function of
stable loading, accurate measurement, fast control response,
various modes, can conveniently and accurately realize the digital
calibration of load and elongation, it also has the characteristics
of full load protection and position protection etc.
Main Specification
| Model | GLW-2 |
| Force capacity | 2kN |
| Force range | (1%-100%)F.S. |
| Force resolution | +250000 Steps, the same resolution without step division |
| Force accuracy | ±0.5% |
| Force keeping time | More than 3hours set freely |
| Force keeping relative error | ±0.5% |
| Displacement resolution | 0.001mm |
| Displacement control resolution | 0.00002mm |
| Displacement value accuracy | ±0.5% |
| Displacement speed range | (0.01 -500)mm/min, set freely |
| Displacement speed relative error | ±0.5% |
| Effective tensile travel | 200mm |
| Stamping head and base | (100×100)mm；hardness:HB240~280 |
| Clamping cable diameter | 30mm |
| Host power supply | Ac220V±10%,50~60Hz,0.8kW |
| Computer power supply | Ac220V±10%,50~60Hz,0.5kW |
| Weight | 180kg |
Product configuration
- Load sensor: America Vishay (with 10kN)
- Reducer: Taiwan KOKI
- AEC-1200 controller: HERRMN
Installation Requirement
Power supply: single phase, AC220V±10%, 50～60Hz, 0.8kW.
Install onto a stable base and room of more than 1 m around.
Ambient temperature: 25℃±10℃, humidity: ≤80% non-condensing.
No vibrating or corrosive media indoor.
Lay-out Drawing
