1. General
Monitoring Parameters: SpO2,PR,PLETH,Pulse strength,TEMP
Signal sockets:SpO2 socket,TEMP socket,USB socket(for charge
battery and transmit data)
2. Display screen
Type: 240 × 320 dot matrix color TFT LCD screen
Display area: 43mm×58mm
3. Functions
PLETH: The monitor can display PLETH waveform
Intelligent parameter monitoring screen: The monitor automatically
selects the parameter measurements to display according to the
probes connected to the monitor.
Audio and visual alarm: The speaker sounds the alarm and the
parameter’s measurement will become in red to flash on the screen.
Also the same when sensor-off.
Prompting: Icons of battery capacity, pulse sound switch and alarm
sound switch.
Power saving: The monitor will automatic shut down to save power.
The time is settable.
Trend: Storage/Review trend data up to 3888 groups, data save time
being set freely
Data storage: The saved data will never be lost even if the monitor
is powered off.
Communication: Transmitting the patient’s trend to a PC for
display, observation, saving and printing via USB or Bluetooth
wireless
4. Electrical specifications
Working Voltage: D.C. 3.7V/3000mAH
AC power adaptor
Input: AC 100 V～240V, 50/60Hz, 5VA
