Q8A1 Electrical Universal 10A Oscilloscope Clamp On Current
Transformer High Frequency 2M HZ CAT III 600V
The model Q8A1 current probe is based on AC transformer technology
for use in measurement of AC current, it is suitable for 5A, 10A
cable online measurement.
Probes work with testing devices are ideal for measuring currents
with high accuracy making them indispensable tools for evaluating
current consumption and control current. In recent years, customers
are seeking current probes with high sensitivity to increase the
accuracy of design and verification.GFUVE offers wide range of
current sensors for its portable power analyzers. The products
included in this range can be used to measure current levels from a
few mA to up to several thousand amperes.
GFUVE Current transformer clamp meters are equipped with rigid jaws
of made of ferrite iron. The jaws are individually wrapped by coils
of copper wire. Together, they form a magnetic core during
measurements. Their basic operation is like that of a transformer.
It works with one primary turn, or winding, which in nearly all
cases is the conductor .
The GFUVE clamp-on current transformer is very popular with our
customers due to its fast and easy installation Produced with
amorphous silicon core or permalloy core, this product features
small size, high precision good stability and good
anti-interference This product is widely used for measuring power
and energy in the fields of electric power, communication and
monitoring system. Besides the high precision and the small phase
error this clamp-on current transformer can be used to measure a
wide variety of electric parameters without disconnecting the
exiting electric system
Features
1. Suitable for 5A, 10A cable online measurement
2. Holding wire diameter: φ8mm
3. Dimension: 42.6mm × 122.5mm × 23mm
4. Load capacity: ≤4Ω
5. Installation: clamp type
6. Output mode: lead output
Parameter
| Electrical parameters |
| Ratio | 1000: 1 or 2000:1 (customized) |
| Accuracy class | 0.1% |
| Primary current | 0 - 10A AC |
| Secondary current | 0 - 10mA AC (customized) |
| Max. Cont. Input current | 12A |
| Load capacity | ≤4Ω |
| Over voltage category | CAT III 600V |
| Electrical parameters - continued | |
| Output signal (AC current) | From 0 to 10mA AC at nominal input current |
| Output signal (AC voltage) | From 0 to 100mV AC at nominal input current |
| Frequency range | 40Hz-2000Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 600 V |
| Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation | Clamp type |
| Output mode | Lead output (2.5m) |
| Mechanical parameters |
| Dimensions (L x W x H) (mm) | 42.6x122.5x23 |
| Weight (g) | 250 |
| Holding wire diameter (mm) | φ8 |
| Max. jaw opening (mm) | 8 |
| Color | Black |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
Photo
