Ratio 1000:1 Finest Inductive Current Clamp Clip On CTs Online for
Measurement
The GFUVE Clip On CTs Q8-3 clamps around the current carrying
conductor to perform noncontact current measurements while without
interrupting the circuit under test.
The Q8-3 Clip On CT is suitable for 5A, 10A cable online
measurement, the user-friendly shape make It easily clamp onto
cables.
Features
Suitable for 5A, 10A cable online measurement.
Holding wire diameter: φ8mm
Dimension: 42.6mm × 122.5mm × 23mm
Load capacity: ≤4Ω
Installation: clamp type
Output mode: lead output
Applications
Electric energy meter calibrator (on site)
Double clamp type ground resistance tester
Double clamp type phase volt-ampere meter
Digital multi-meter
Multi-function energy meter
Power quality analyzer
Matched instruments
Calibration instrument on site
Parameter
| Electrical parameters |
| Ratio | 1000: 1 or 2000:1 (customized) |
| Accuracy class | 0.2%, 0.5% |
| Primary current | 0 - 10A AC |
| Secondary current | 0 - 10mA AC (customized) |
| Max. Cont. Input current | 12A |
| Load capacity | ≤4Ω |
| Over voltage category | CAT III 600V |
| Output signal (AC current) | From 0 to 10mA AC at nominal input current |
| Output signal (AC voltage) | From 0 to 1V AC at nominal input current |
| Frequency range | 40Hz-2000Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 connector |
| Max. voltage not insulated conductors | 600 V |
| Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 |
| Installation | Clamp type |
| Output mode | Lead output (2.5m) |
| Mechanical parameters |
| Dimensions (L x W x H) (mm) | 42.6× 122.5 × 23 |
| Weight (g) | 225 |
| Holding wire diameter (mm) | φ8 |
| Max. jaw opening (mm) | 8 |
| Color | Gray |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
FAQ, following questions will help you to select the matched probe
for your applications.
1. Please determine if you are measuring AC or DC?
GFUVE Q8-3 is for AC measurement. If DC, we have hall effect models
to suggest.
2. What is the maximum current you will measure?
Q8-3 max current is 12A
3. What size conductor will you clamp onto? This parameter
determines the probe jaw size needed.
Q8-3 can clamp conductor with diameter within 8mm
4. What type of probe output do you need or can you work with (mA,
mV, A, AC, etc.)?
Q8-3 can customize output with mA
5. What is the working voltage of the conductor to be measured?
GFUVE probes should be used below 600 volts
6. What type of termination do you need: jacks, leads or BNC?
Q8-3 standard has 2.5meter leads. We can offer jacks or BNC… as
options.
7. If you cannot find information you need or would like
assistance, contact us today. We have designed many more probes
than those shown in this catalog, and we manufacture in Beijing,
China.
Photos
