1.Fault detection and alarm functions, easy to use and maintenance
2. The running status can be programmed and controlled with the
built-in keyboard on the main board
3. Mechanical antipinch function. If the gate meets resistance in
the reset process, motors will stop working automatically within
the prescribed time and reset again after the default delay (till
fully reset)
4. Anti-breakthrough function. The gate is locked automatically
until opening signal received
5. Synchronization functions (for dual gate equipments)
6. Automatic reset function. Should the user fail to pass within
the prescribed time (default time is 5 seconds),the system will
cancel the authority of the current user automatically
7. Gate can be set as normally open or normally closed
8. Can be used with variety of card readers: IC / ID card readers,
bar codes, fingerprints, etc. (Access controller needed)
9. Direction can be set as single-direction or bi-direction
10. LED direction indicator
11. Gate auto opens when power off and auto close when power on,
complying with fire safety requirements
Product Description
Product description for Semi-automatic optical pedestrian flap
turnstile access control gate
| Technical Data | Unit | A221A |
| Passage width | mm | <550 |
| Throughput rate | p/m | 35 |
| Power supply | V(ac) | 100-240 |
| Operational voltage | V(dc) | 24 |
| Max power consumption | w | 35 |
| Frequency | hz | 50-60 |
| prectection level | ip | >44 |
| Working temperature | degree | -25 to +70 |
| Dimension excluding bars | mm | 1410X300X1005 |
| Net weight including bars | Kg | 87 |
