Hinge Joint Wire Mesh
This type of wire fence has four wrap hinge joints, in which two
vertical stay wires wrap together to form hinged joint. The knot
acts as a hinge that gives under pressure, then springs back into
shape. This structure provides easy installation because the hinge
"gives" while retaining full height for continuing protection and
good looks. Vertical wires are individually cut and wrapped for
maximum strength and flexibility.
Hinge joint fencing is the best choice of ranchers for protecting
the jumping animals like deers, horses and cows, sheep and goats.
The hinge-knot system ensures proper stretching and allows for
easier installation over hilly or rough terrain. Uses of our
hinge-joint knots allow the fence to give under pressure and spring
back into shape. The heavy zinc coating of the wire offers the
finished fencing good rust resisting and corrosion.
Common hinged joint fencing is made from galvanized wire with a
wire diameter of 2.5 mm and the top and bottom wire are made with
wire diameter of 2.8 mm. Fence height is normally from 0.8m to 2m.
A variety of heights, hole mesh, spacing and styles are offered for
more choices.
Material: High strength galvanized steel wire, Hot-dipped Galvanized iron
wire
Features: It is simple in structure, easy to maintain, easy to install, less
weight, easy for transport and easy ventilation. With reasonable
structure, beautiful appearance, tensile strength, high corrosion
resistance, etc.
Application:
Hinge joint wire mesh is a kind of mesh fence used in cattle, goat,
deer, and pig. It is used for grassland, pastures, protection of
ecological projects, protecting grassland, forestry, highway, and
environments. Mainly used for grass, pasture fencing, and
ecological protection projects.
Specifications
Mesh Wire diameter:1.8mm~2.5mm
Edge wire diameter: 2.0mm~3.5mm
| Sizes | Number of Warp Wire | Roll Width | Warp & Weft Wire Diameter |
| Edge Warp Wire | Middle Weft Wire | Warp Wire |
| 5/70/15 | 5 | 700mm | 2.0-3.5mm | 1.8-2.5mm | 1.8-2.5mm |
| 7/80/15 | 7 | 800mm | 2.0-3.5mm | 1.8-2.5mm | 1.8-2.5mm |
| 8/80/15 | 8 | 800mm | 2.0-3.5mm | 1.8-2.5mm | 1.8-2.5mm |
| 8/90/15 | 8 | 900mm | 2.0-3.5mm | 1.8-2.5mm | 1.8-2.5mm |
| 8/100/15 | 8 | 1000mm | 2.0-3.5mm | 1.8-2.5mm | 1.8-2.5mm |
| 8/115/15 | 8 | 1150mm | 2.0-3.5mm | 1.8-2.5mm | 1.8-2.5mm |
| 9/100/15 | 9 | 1000mm | 2.0-3.5mm | 1.8-2.5mm | 1.8-2.5mm |
| 9/125/15 | 9 | 1250mm | 2.0-3.5mm | 1.8-2.5mm | 1.8-2.5mm |
| 10/120/15 | 10 | 1200mm | 2.0-3.5mm | 1.8-2.5mm | 1.8-2.5mm |
| 10/130/15 | 10 | 1300mm | 2.0-3.5mm | 1.8-2.5mm | 1.8-2.5mm |
| 11/140/15 | 11 | 1400mm | 2.0-3.5mm | 1.8-2.5mm | 1.8-2.5mm |
| Item | Specification | The top and bottom wires diameter | The middle wires diameter | Roll diameter |
| 7/150/813/50 | 102+114+127+140+152+178 | 2.5 | 2.0 | 280 |
| 8/150/813/50 | 89(75)+89+102+114+127+140+152 | 2.5 | 2.0 | 280 |
| 8/150/902/50 | 89+102+114+127+140+152+178 | 2.5 | 2.0 | 280 |
| 8/150/1016/50 | 102+114+127+140+152+178+203 | 2.5 | 2.0 | 280 |
| 8/150/1143/50 | 114+127+140+152+178+203+229 | 2.5 | 2.0 | 280 |
| 9/150/991/50 | 89(75)+89+102+114+127+140+152+178 | 2.5 | 2.0 | 280 |
| 9/150/1245/50 | 102+114+127+140+152+178+203+229 | 2.5 | 2.0 | 280 |
| 10/150/1194/50 | 89(75)+89+102+114+127+140+152+178+203 | 2.5 | 2.0 | 280 |
| 10/150/1334/50 | 89+102+114+127+140+152+178+203+229 | 2.5 | 2.0 | 280 |
| 11/150/1422/50 | 89(75)+89+102+114+127+140+152+178+203+229 | 2.5 | 2.0 | 280 |
Note: the item numbers: the first number means the number of wire of
width;
the second number means distance of horizontal wires (mm);
the third number means the height of mesh(mm);
the fourth number means length of mesh(m).
We can also produce the mesh according to the customers special
requirements. |
Other Specifications according to your requirements.
Packing:
